メインコンテンツまでスキップ

BES-53248 を使用した MetroCluster IP またはクラスタの CRC エラー

Views:
66
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
metrocluster
Last Updated:

のしんだ

環境

  • ONTAP 9
  • MetroCluster IP またはクラスタ
  • BES-53248 
  • EFOS 3.4.3.3
  • EFOS 3.4.4.2

問題

  • 1 つ以上のクラスタポートで CRC エラーが報告されました
  • ONTAP のアップグレード後に発生し、すべてのノードのパフォーマンスが低下する可能性があります
  • EMS / イベントログでは次の情報が報告されます。 

[cshmd: hm.alert.raised:alert]: Alert Id = SwitchIfOutErrorsWarn_Alert , Alerting Resource = switch/Slot: 0 Port: 9 25G - Level raised by monitor cluster-switch
[intr: netif.linkErrors:error]: Excessive link errors on network interface e0a. Might indicate a bad cable, switch port, or NIC, or that a cable connector is not fully inserted in a socket. On a 10/100 port, might indicate a duplex mismatch.
[vifmgr: vifmgr.cluscheck.crcerrors:alert]: Port e0a on node  is reporting a high number of observed hardware errors, possibly CRC errors.

  • MetroCluster IP 環境では、非同期ログエラーと組み合わせてエラーが発生します。

[monitor: monitor.globalStatus.critical:EMERGENCY]: Controller failover of affnode is not possible: unsynchronized log
[cf_main: cf.fsm.takeoverOfPartnerDisabled:error]: Failover monitor: takeover of affnode disabled (unsynchronized log).
[intr: netif.linkErrors:error]: Excessive link errors on network interface e0a. Might indicate a bad cable, switch port, or NIC, or that a cable connector is not fully inserted in a socket. On a 10/100 port, might indicate a duplex mismatch.
[vifmgr: vifmgr.cluscheck.crcerrors:alert]: Port e0a on node affnode is reporting a high number of observed hardware errors, possibly CRC errors.

  • ifstat を実行した場合、出力に高い CRC エラーが報告されます

...
Non-primary u/c:    0  | CRC errors:     175k | Runt frames:      0

...

  • クラスタポートに接続されたスイッチポートでインターフェイスエラーが報告されました。

#show interface ethernet 0/14 output:

Total Packets Received with MAC Errors......... 4859
Jabbers Received............................... 3121
...
FCS Errors Received............................ 1738
...

Total Transmit Errors.......................... 106
...
Transmit errors................................ 106

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.