メインコンテンツまでスキップ

Fabric MetroCluster にターゲットが表示されない

Views:
1
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

環境

  • ONTAP 9
  • ファブリックMetroCluster
  • ストレッチMetroCluster の略
  • X1133A-R6:Broadcom LPE16004、クアッドポート16Gb FCアダプタ(PCIe)

問題

  • HBAホストアダプタにターゲットがなく、接続されているスイッチポートで「?」が報告されています。 これにより、システムはクアッドパスHAではなくマルチPAH HAに移行されました。
例:

::> system node run -node <node>sysconfig -a

slot 2: FC Host Adapter 2d (Emulex XE201 rev. 48, N-port, <UP>)
   Board name:     111-02451
   Serial Number:    0000000000
   Firmware rev:    12.0.378.1
   Host Port Id:    0x00000
   FC Node Name:    2:000:000000:000000
   FC Port Name:    1:000:000000:000000
   SFP Vendor:     EMULEX
   SFP Part Number:   AFBR-57F5MZ-ELX
   SFP Serial Number: XXXXXXXXXXX
   SFP Capabilities:  4, 8 or 16 Gbit
   Link Data Rate:   16 Gbit
   Switch Port:     ?
   [disks, shelves & ATTO bridges missing]

  • ATTO FibreBridgeのメタデータがありません:

例:

slot 2: FC Host Adapter 2c (Emulex XE201 rev. 48, N-port, <UP>) Board name: 111-02451 Serial Number: 0000000000 Firmware rev: 12.0.378.1 Host Port Id: 0x00000 FC Node Name: 2:000:000000:000000 FC Port Name: 1:000:000000:000000 SFP Vendor: EMULEX SFP Part Number: AFBR-57F5MZ-ELX SFP Serial Number: XXXXXXXXXXX SFP Capabilities: 4, 8 or 16 Gbit Link Data Rate: 16 Gbit Switch Port: FC-SW-1:3 ... [Removed disks to shorten output] ... FC-SW-1:7.126L0 : ???????? ???????????????? ???? FB7500N000000 FC-SW-3:7.126L0 : ???????? ???????????????? ???? FB7500N000000 FC-SW-1:7.shelf20 : DS224-12 Firmware rev. IOM12 A: 0281 IOM12 B: 0281
  • ノード側またはスイッチ側でSFPを交換しても、ポートのステータスは変わりません。 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.