メインコンテンツまでスキップ

volume_hot_spare_in_use はコピーバックを実行しません

Views:
30
Visibility:
Public
Votes:
0
Category:
e-series-santricity-management-software
Specialty:
hw
Last Updated:

環境

  • SANtricity OS ソフトウェア 1.71
  • コントローラファームウェア 08.71.03.00

問題

  • ディスク交換後にコピーバックは実行されません。
  • ディスク交換後もデータドライブのステータスは変わりません。

   Drive at Shelf 99, Bay 7
   
     Status:                    Replaced                                        
                  
      Mode:                     Assigned                                        
      Raw capacity:              1,676.716 GB                                    
      Usable capacity:          1,671. 216 GB                                    
      World-wide identifier:    
      Associated volume group:  HDD-RAID5   

  • RECOVERY-GURU-PROCEDURES VOLUME_HOT_SPARE_IN_USEを表示します。

Failure Entry 1: VOLUME_HOT_SPARE_IN_USE- Recovery Failure Type Code: 21
Storage array: RabbitSAN
Volume group: HDD-RAID5
Status: Optimal
RAID level: 5
Failed drive at:  shelf 99, bay 7
Service action (removal) allowed: No Service action LED on component: No
Replaced by drive at: shelf 99,  bay 8
Volumes: HDD-RAID5

  • スペアディスクのモードは Hot spare in-useです。

   Drive at Shelf 99, Bay 8
   
      Status:                    Optimal                                         
                  
     Mode:                     Hot spare in-use                                
      Raw capacity:              1,676.716 GB                                    
      Usable capacity:          1,671. 216 GB                                    
      World-wide identifier:     
      Associated volume group:  HDD-RAID5  

  • RAID グループ Optimalはです。

   Name:              HDD- RAID5           
                                          
      Status:         Optimal             
      Capacity:       5, 013.648 GB        
      Current owner:  Controller in bay B  

      Quality of Service (QoS) Attributes

         RAID level:                    5                          
         Drive media type:              Hard Disk Drive            
         Drive interface type:         Serial Attached SCSI (SAS)  
         Shelf loss protection:        No                         
         Secure-Capable:                No                         
         Secure- Enabled                No                         
         Data Assurance (DA) capable:   Yes                        
         DA enabled volume present:    Yes                        

      Total Volumes:           1        
         Thick volumes:       1        
         Repository volumes:  0        
         Free Capacity:        3.648 GB  

      Associated drives - present (in piece order)
      Total drives present:  5

         Shelf  Bay                                               
         99     4       
         99     5                                                 
         99     6           
         99     7                                                 
        99     8 [hot spare drive is sparing for drive at 99, 7]  

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.