メインコンテンツまでスキップ

FlexGroup の容量を拡張または拡張できますか。

Views:
161
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

環境

  • ONTAP 9
  • FlexGroupボリューム
  • スペースアカウンティング
  • ONTAP S3サーバ

回答

はい。既存のコンスティチュエントに容量を追加するか、新しいコンスティチュエントを追加して、 FlexGroup ボリュームのサイズを拡張できます。

メモ:以下のいずれかの方法を使用する前に、アグリゲートに新規または大容量のコンスティチュエント用の十分なスペースがあることを確認し
既存の FlexGroup コンスティチュエントへの容量の追加:
  • これにより、すべてのコンスティチュエントの全体的な容量が増加します
  • 追加する容量はすべてのコンスティチュエントに分散されます。

例:

volume modify -vserver vserver_name -volume fg_name -size new_size <----New total capacity

コンスティチュエントを追加して容量を拡張します。
:新しく追加されたコンスティチュエントは空になり、コンスティチュエントの負荷が分散されていないためにデータの取り込みが停止する
  • 通常、これは次の状況でのみ実行されます。
    • クラスタに新しいノードが追加された。
    • 既存のノードに新しいアグリゲートが作成された。
    • 既存のコンスティチュエントがハードウェアの FlexVol の最大サイズに達しているため、サイズを変更できません。
    • FlexGroup の全体的なパフォーマンスを向上させる必要があります
  • 各アグリゲートに同じ乗数(アグリゲートごとのコンスティチュエント)を使用して FlexGroup を設定することがベストプラクティスです

例:

volume expand -vserver vserver_name -volume fg_name -aggr-list aggregate1,aggregate2 -aggr-list-multiplier

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.