メインコンテンツまでスキップ

Eシリーズが無効なシステム設定を入力しました- AutoSupport メッセージ

Views:
3
Visibility:
Public
Votes:
0
Category:
e-series-systems
Specialty:
esg
Last Updated:

環境

NetApp Eシリーズ

イベント サマリ

  • AutoSupportメッセージは、次のタイトルで生成されます。

E-Series Notification (Entering invalid system configuration) CRITICAL

  • 関連するケースが現象で生成されます。

EHWENC:E-Series Notification from <Storage Array Name> (Entering invalid system configuration) CRITICAL

検証

AutoSupportメッセージのメジャーイベントログ内のイベント:

2900 Entering invalid system configuration

解決策

  • システムのパーツ番号を確認します。アレイが現在無効なシステム構成状態にあることを示すメッセージが表示されます。
  • この問題は、ファームウェアのアップグレードやドライブ シェルフのホットアドなどのメンテナンスが原因で発生する可能性があります。
  • Please contact NetApp Technical Support or log into the NetApp Support Site to create a case. Reference this article for further assistance.

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.