メインコンテンツまでスキップ

EMS レポートは「 fci.device.timeout" 」です

Views:
9
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

環境

  • MetroCluster FC
  • ATTO 7600N ファイバブリッジ
  • ONTAP 9

問題

  • EMS レポートでは"fci.device.timeout"、と報告されます。

例:

Wed Jun 02 09:48:43 +0900 [node: slifc_timeout_3: fci.device.quiesce:debug]: Adapter 1d encountered a command timeout on Disk device PROD_FAB_1_SW3_D7:10.126 (0x0e070a00) LUN 10 cdb 0x28:4d2a22f8:0020 retry: 0 Quiescing the device.

Wed Jun 02 09:48:44 +0900 [node: slifc_timeout_3: fci.device.timeout:debug]: HBA 1d encountered a device timeout on Disk device PROD_FAB_1_SW3_D7:10.126 (0x0e070a00) LUN 10 cdb 0x28:4d2a22f8:0020 retry: 0

  • CRC エラーは、スイッチ PROD_FAB_1_SW3_D7 : 10 に接続された FibreBridge ポートで確認されます。

例:

1 )get FCPortErrors allATTO シリアルコンソールからを実行します

get FCPortErrors all
; Fibre Channel Error Counts
; Port | Link Failures | Sync Loss | Signal Loss | Invalid Tx | Invalid CRC
;==========================================================================
  1         717   56806347        0       22      1888   <<<<<CRC errors on FC1
  2          2      658        0      172        0

 

2) ASUP で「ストレージブリッジ」を調べます。

Bridge: PROD_FAB_1_SW3_D7:10.126L0
Serial: FB7600NXXXXX
Vendor: ATTO
WWN:   2000001086ad9800
Model:  FibreBridge 7600N
Rev:   4.10

FC Port 2100001086ad9800:
State:        up
Speed:        16 Gb/s
Topology:       point-to-point
Link Failure Count: 717
Loss of Sync Count: 56804608
CRC Error Count:   1888
LIP Count:      0
Frames In:      3046326
Frames Out:      6137344743
SFP Vendor:      AVAGO
SFP Part Number:   AFBR-57G5MZ-ELX
SFP Serial Number:  AD1928G00PZ

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.