メインコンテンツまでスキップ

FAS2750 アドバンストディスクパーティショニング( ADP )への移行は機能していません

Views:
148
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

環境

  • FAS2750 HA ペアは 12 本のディスクを含むシングルノードクラスタとして導入されています
  • 12 本のディスクを追加
  • 内蔵シェルフ

問題

  • ONTAP のブートが機能しない
  • ブートメニューのオプション 4 (ディスクの初期化および初期化)にエラーが表示される:
bootarg.bootmenu.selection is |4a|
BOOTMGR: The system has 0 disks assigned whereas it needs 3 to boot, will try to assign the required number.
Sep 28 09:45:50 [localhost:raid.autoPart.disabled:ALERT]: Disk auto-partitioning is disabled on this system: the system needs a minimum of 8 usable internal hard disks.
BOOTMGR: already_assigned=0, min_to_boot=3, num_assigned=0
BOOTMGR: No disks assigned to this system, looking for 3 unassigned partitions.
Sep 28 09:45:50 [localhost:callhome.raid.adp.disabled:ALERT]: Disk auto-partitioning is disabled on this system: ADP DISABLED. Terminatedssigned 0 out of 3 disks requested"

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.