メインコンテンツまでスキップ

FlexArray RPANIC で、のテイクオーバーの致命的なディスクエラーが ONTAP に通知されます RAID グループ

Views:
49
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

に適用されます

 

  • ONTAP 9.x
  • E シリーズ E5600 とコントローラファームウェア 08.40.50.00
  • ディスクタイプ: HUC1012CSS601 ファームウェアバージョン: MS06

問題

 

  • ONTAP クラスタノードがパニック状態になり、で HA ペアがリブートされます テイクオーバー
例:
 
RPANIC:aggr aggr1: raid volfsm, fatal disk error in RAID group with no parity disk. raid type raid0 in SK process config_thread on release 9.3P7 (C)
 
複数の SCSI チェック条件エラー:

isp2400_intrd: scsi.cmd.checkCondition:error]: Disk device x:18.126L31: Check Condition: CDB 0x88:000000018b75632e:00000009:
Sense Data SCSI:recovered error -  (0x1 - 0x45 0x0 0xb)(9971).

0x01 RECOVERED ERROR Indicates that the command completed successfully, with some recovery action performed by the device server. Details may be determined by examining the sense data
(e.g., the INFORMATION field). If multiple recovered errors occur during one command, the choice of which error to report (e.g., first, last, most severe) is vendor specific.
0x45 0x00 D Z T P R O M A E B K V F SELECT OR RESELECT FAILURE

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.