メインコンテンツまでスキップ

no により NIC ポートで認識されたフレーム廃棄数 バッファエラーです

環境

すべての NIC ポート

問題

  • ifstat コマンド出力で、 NIC ポートのフレーム破棄が増加しています。
  • 合計廃棄数のレートは、バッファエラーが発生しない割合とほぼ同じです。

::> system node run -node <node_name> -command ifstat -a 

-- interface  e0f  (17 days, 13 hours, 50 minutes, 52 seconds) --

RECEIVE
 Total frames:    22701m | Frames/second:   14948  | Total bytes:      4019g
 Bytes/second:     2646k | Total errors:        0  | Errors/minute:       0 
 Total discards:  21861  | Discards/minute:     1  | Multi/broadcast:   105k
 Non-primary u/c:     0  | CRC errors:          0  | Runt frames:         0 
 Long frames:         0  | Length errors:       0  | Alignment errors:    0 
 No buffer:       21521 | Pause:               0  | Jumbo:               0 
 Noproto:             0  | Bus overruns:      340  | LRO segments:    16365m
 LRO bytes:        2571g | LRO6 segments:       0  | LRO6 bytes:          0 
 Bad UDP cksum:       0  | Bad UDP6 cksum:      0  | Bad TCP cksum:       0 
 Bad TCP6 cksum:      0  | Mcast v6 solicit:    0 

 

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.