メインコンテンツまでスキップ

パニック:システムIDがないか無効です

Views:
14
Visibility:
Public
Votes:
0
Category:
fas-systems<a>翻訳対象:2009173246</a><a />
Specialty:
hw
Last Updated:

環境

  • AFF A700
  • FAS9000

問題

  • 次のパニックが発生します

WARNING: Unable to get sysid!
PANIC  : Missing/invalid System ID: bootarg.frurom.fileid=<0>.

version: 9.7P5: Tue Jun 23 00:04:35 EDT 2020
conf   : x86_64.optimize
cpuid = 14
Uptime: 16s
ahcich0: AHCI reset done: devices=00000001
coredump: primary dumper is not yet registered this early during system initialization. A coredump will not be available at this time.
coredump: secondary dumper is not yet registered this early during system initialization. A coredump will not be available at this time.
System halting...
BIOS Version: 10.7
Portions Copyright (C) 2014-2017 NetApp, Inc. All Rights Reserved.
.
.
.
Initializing System Memory ...
Loading Device Drivers ...
IPMI PCI Slot Configuration failed.
Configuring Devices ...
Device(s) in slot missing, attempting to recover it.
System is resetting.
BIOS Version: 10.7
Portions Copyright (C) 2014-2017 NetApp, Inc. All Rights Reserved.

Initializing System Memory ...
Loading Device Drivers ...
IPMI PCI Slot Configuration failed.
Configuring Devices ...

CPU = 2 Processor(s) Detected.
  Intel(R) Xeon(R) CPU E5-2697 v4 @ 2.30GHz (CPU 0)
  CPUID: 0x000406F1. Cores per Processor = 18
  Intel(R) Xeon(R) CPU E5-2697 v4 @ 2.30GHz (CPU 1)
  CPUID: 0x000406F1. Cores per Processor = 18
524288 MB System RAM Installed.
SATA (AHCI) Device: SV9MST6D120GLM41NP

Boot Loader version 6.0.8
Copyright (C) 2000-2003 Broadcom Corporation.
Portions Copyright (C) 2002-2018 NetApp, Inc. All Rights Reserved.

BIOS POST Failure(s) detected: PCIe device missing error detected. Abort AUTOBOOT

  • partner-sysid printenvの出力にがありません

LOADER-B> printenv

Variable Name     Value
-------------------- --------------------------------------------------
ARCH          X86_64
AUTOBOOT        true
AUTOBOOT_FROM     PRIMARY
AUTO_FW_UPDATE     true
BACKUP_BIOS_VERSION  10.5
BIOS_DATE       Tue 10/22/2019
BIOS_INTERFACE     40000000000400C7
BIOS_VERSION      10.7
BOARDNAME       SB_XXI
bootarg.frurom.fileid 0
bootarg.init.flash_optimized true
BOOTED_FROM      OTHER
boot_backup      setenv BOOTED_FROM BACKUP; boot -elf64 $GX_BACKUP_KERNEL_URL
BOOT_CONSOLE      eficons0a
boot_diags       boot -sld -elf64 $GX_DIAG_URL
BOOT_FLASH       flash0a
boot_ontap       autoboot
boot_primary      setenv BOOTED_FROM PRIMARY; boot -elf64 $GX_PRIMARY_KERNEL_URL
BT_BIOS_VERSION    10.7
BT_LOADER_VERSION   6.0.8
CPU_NUM_CORES     36
CPU_SPEED       2300
CPU_TYPE        Intel(R) Xeon(R) CPU E5-2697 v4 @ 2.30GHz
ENABLE_SMI       false
ENV_VERSION      1
FIRMWARE_URL      fat://boot0/X86_64/firmware/SB_XXI/firmware.img
GX_BACKUP_KERNEL_URL fat://boot0/X86_64/freebsd/image2/kernel
GX_DIAG_URL      fat://boot0/X86_64/freebsd/image1/kernel
GX_PRIMARY_KERNEL_URL fat://boot0/X86_64/freebsd/image1/kernel
ldkern         load -elf64 $GX_PRIMARY_KERNEL_URL
LOADER_VERSION     6.0.8
MOBO_MODEL       FAS9000
MOBO_REV        F0
MOBO_SERIAL_NUM    031939000543
MOBO_VENDOR      NetApp, Inc.
netboot        setenv BOOTED_FROM NETWORK; boot -elf64 
ntap.init.kernelname X86_64/freebsd/image1/kernel
OEM_TYPE_2/0/29/0/0x8086/0x8D26 0/u/b
OEM_TYPE_2/0/31/2/0x8086/0x8D02 0/u/a
OEM_TYPE_2/173/0/0/0x11F8/0x8072 9/#/#
OEM_TYPE_2/207/0/0/0x10B5/0x8732 10/#/#
OEM_TYPE_2/208/8/0/0x10B5/0x8732 10/#/#
OEM_TYPE_2/208/9/0/0x10B5/0x8732 10/#/#
OEM_TYPE_2/209/0/0/0x8086/0x1584 10/#/#
OEM_TYPE_2/210/0/0/0x8086/0x1584 10/#/#
OEM_TYPE_2/57/0/0/0x10B5/0x8732 4/#/#
OEM_TYPE_2/58/8/0/0x10B5/0x8732 4/#/#
OEM_TYPE_2/58/9/0/0x10B5/0x8732 4/#/#
OEM_TYPE_2/59/0/0/0x8086/0x1584 4/#/#
OEM_TYPE_2/59/0/1/0x8086/0x1584 4/#/#
OEM_TYPE_2/59/0/2/0x8086/0x1584 4/#/#
OEM_TYPE_2/59/0/3/0x8086/0x1584 4/#/#
OEM_TYPE_2/60/0/0/0x8086/0x1584 4/#/#
OEM_TYPE_2/60/0/1/0x8086/0x1584 4/#/#
OEM_TYPE_2/60/0/2/0x8086/0x1584 4/#/#
OEM_TYPE_2/60/0/3/0x8086/0x1584 4/#/#
OEM_TYPE_2/96/0/0/0x8086/0x1533 0/e/M
OEM_TYPE_3       0/0/31/2/u0a.0/SV9MST6D120GLM41NP;
OEM_TYPE_4       32768/0/4096/0xC7FE8000
PRIMARY_BIOS_VERSION 10.7
savenv         saveenv
sysvar.init.boot.varfs.restore.success true
SYS_MODEL       FAS9000
SYS_REV        A1
SYS_SERIAL_NUM     xxxxxxxxxxxxx
update_flash      flash -backup $FIRMWARE_URL flash0a
USE_SECONDARY     false
vm.pci.mmio.64.addr  0xc000000000
vm.pci.mmio.64.size  0x3ffc000000

  • Slot 6 missing イベントallの出力に表示されます

Record 2444: Mon May 16 02:53:06.837889 2022 [SP.notice]: PCIE Config Info received from BIOS
Record 2445: Mon May 16 02:53:06.894052 2022 [SP.notice]: ScratchPad Config Info received from BIOS
Record 2446: Mon May 16 02:53:10.215127 2022 [IPMI.notice]: (PUA) Enable power to all PCIe slots
Record 2447: Mon May 16 02:53:10.224249 2022 [IPMI.notice]: (PUA) Enable power to all PCIe on board device
Record 2448: Mon May 16 02:53:10.000000 2022 [SysFW.notice]: BIOS Version: 10.7
Record 2449: Mon May 16 02:53:10.274365 2022 [IPMI.notice]: (PUA) P_stat :slots=0x0,onboard_devs=0x0,final
Record 2450: Mon May 16 02:53:10.274422 2022 [IPMI.notice]: (PUA) Power status of all PCIe slots unchanged
Record 2451: Mon May 16 02:53:16.564218 2022 [IPMI.notice]: 7502 | 02 | EVT: 01500f14 | Bat_Rem_Cap | Assertion Event, "Lower Non-critical going low " | Reading: 0.375 | Threshold: 0.500
Record 2452: Mon May 16 02:53:19.000000 2022 [SysFW.critical]: IPMI PCI Slot Configuration failed.
Record 2453: Mon May 16 02:53:19.432640 2022 [Trap Event.critical]: hwassist post_error (26)
Record 2454: Mon May 16 02:53:24.000000 2022 [SysFW.notice]: Device 94/0/0 (SLOT-6-CPU0) missing
Record 2455: Mon May 16 02:53:25.456187 2022 [IPMI.notice]: 7602 | 02 | EVT: 6f02ffff | PCM_Status | Assertion Event, "Fault"
Record 2456: Mon May 16 02:53:27.000000 2022 [SysFW.notice]: Device(s) in slot missing, attempting to recover it.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.