メインコンテンツまでスキップ

Cisco Switch NX3232C が 1.6 から 1.8 への RCF アップグレード後にパニック状態になる

Views:
36
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches<a>2009045281</a>
Specialty:
hw
Last Updated:

環境

  • Cisco Nexus 3232C
  • リファレンス構成ファイル( RCF ) 1.8
  • NX-OS

問題

  • スイッチ 2 で RCF ファイルを 1.6 から 1.8 にアップグレードしたあとに、クラスタネットワークスイッチ 1 がパニック状態になります
  • NX-OSのアップグレード中に問題が発生することもある
  • EMS logs show :
    • cshmd: hm.alert.raised:alert]: Alert Id = ClusterIfIslDownWarn_Alert
    • cshmd: hm.alert.raised:alert]: Alert Id = ClusterSwitchMissing_Alert
  • スイッチ 1show tech-support のログ:
    • ポートチャネル 1 がダウンしている(動作中のメンバーがいない)
    • ポートチャネル 1 に属するインターフェイスが停止( LACP PDU なし)
    • Last reset at 207919 usecs after Sun Jan 16 01:23:50 2022
      Reason: Kernel Panic
      System version: 9.3(7)
    • nxos_panic: Kernel panic - not syncing: Fatal exception
  • スイッチ 1 がリブートし、ポートチャネル 1 の問題はそれ以上リブートされませんでした

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.