メインコンテンツまでスキップ

FC-VI アダプタ:受信フレームエラーのために受信フレームを破棄しました

Views:
14
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches<a>2009134597</a>
Specialty:
metrocluster
Last Updated:

環境

  • ファブリック接続MetroCluster
  • ONTAP 9

問題

  • EMS レポートではDiscarded a received frame because of a receive frame error、と報告されます。

[Node-A: ispfcvi2500_main4: fcvi.qlgc.FrameDiscardErr:error]: FC-VI adapter: Discarded a received frame because of a receive frame error. Port 0f, QP name = WAFL, QP index = 4, exchange ID 0x1a5, address offset 0xa000, remote node's system id = xxxxxxx.

  • 受信フレームエラーが原因でFCVIポートがリセットされている可能性があります。

[Node-A: ispfcvi2500_main2: fcvi.qlgc.receive.error:error]: FC-VI adapter: Received bad frame on port 0f. Mailbox-1 = 520, Mailbox-2 = 324. Resetting the port.
[Node-A: ispfcvi2500_port2: fcvi.update.link.state:notice]: FC-VI adapter: Physical link is down on port 0f.
[Node-A: fcvi_reset_proc: callhome.mcc.fcvi.reset:notice]: Call home for METROCLUSTER FCVI RESET
[Node-A: ispfcvi2500_port2: fcvi.update.link.state:notice]: FC-VI adapter: Physical link is up on port 0f.

  • porterrshowコマンドの出力 enc in, enc out, crc err, crc g_eof, bad e0flink fail でISLポートに関するエラーとエラーが大量に報告されます。

SwitchA:admin> porterrshow

porterrshow     :
      frames     enc    crc    crc    too    too    bad    enc   disc   link   loss   loss   frjt   fbsy    c3timeout    pcs    uncor
     tx     rx    in    err    g_eof   shrt   long   eof    out   c3    fail   sync   sig            tx    rx    err    err

40:  317.6g  404.5g   2.8k   2.5k   2.5k   1     0    56   151.2k 120     51.4k   0     3     0     0     0    51     0     0
41:  462.1g  544.0g   0     0     0     0     0     0     3.3k  298     1     0     3     0     0     0    128     0     0

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.