メインコンテンツまでスキップ

Brocade スイッチで POD を有効にする方法を教えてください。

Views:
2,470
Visibility:
Public
Votes:
1
Category:
not set
Specialty:
brocade
Last Updated:

環境

Brocadeスイッチ     

回答

  • Brocade スイッチでは、ライセンスとポート有効化のためのポートオンデマンド(POD)モデルが提供されています。
  • ただし、PODライセンスを追加する場合、PODが無効になっているポートは自動的には有効になりません。
Brocadeポッドの詳細

これにより、使用するポートのライセンスのみを購入することで、ライセンスの柔軟性を高めることができます。ライセンスされたポートは、ビジネス要件の増大に応じて追加できます。

PODポートの設定、有効化、無効化に関するルール:

  • ポートは、ライセンスを取得する前に設定できますが、有効にすることはできません。
  • ライセンスのインストール手順は、ライセンスデータベースをチェックします。
  • ライセンスのインストールは licenseadd 、コマンドまたはWeb Tools Switch Admin License Adminタブで行います。
  • ポートは、PODライセンスのインストール後に明示的に有効にし、PODライセンスの削除後に無効にする必要があります。

PODライセンスの追加/削除後にポートを明示的に有効/無効にする方法:

  1. portenable/portdisable コマンドまたはWebツール[Switch Admin Port Setting]タブ
  2. switchenable/switchdisable CommandまたはWebツール[Switch Admin Switch]タブ
  3. スイッチをリブートします。

アクティブポートが現在のPODライセンスプールを使い果たした場合、追加のポートにはライセンスが割り当てられません。このような場合は、PODの割り当てを新しく使用したポートに解放して、未使用のポートからライセンスを手動で移動して予約します。

手順1:ポッドセットからポートを解放する
  1. 現在ライセンスを保持している未使用/オフラインポートを特定します。   

                switch:admin> licenseport --show
      24 ports are available in this switch
      Ports on Demand license is installed
         Dynamic POD method is in use

      24 port assignments are provisioned for use in this switch:
            8 port assignments are provisioned by the base switch allowance
            16 port assignments are provisioned by the Ports on Demand license
      13 ports are assigned to the base switch allowance or installed licenses:
            8 ports are assigned to the Ports on Demand base switch allowance
            5 ports are assigned to the Ports on Demand license
      ports assigned to the base switch allowance:
         0, 1, 2, 3, 4, 5, 6, 9
      ports assigned to the Ports on Demand license:
         7*, 8, 10, 11, 13       >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Port 7 with * is an offline port holding license
      ports that are not assigned:
         12, 14, 15, 16, 17, 18, 19, 20, 21, 22
         23
       0 license reservations are still available for use by unassigned ports
      1 license assignment is held by an offline port (indicated by *)

  1. ポート7からライセンスを解放します。

注: ライセンスを再割り当てする前に、ポートを無効にしてオフラインにし、ライセンスを解放してください。

switch:admin> portdisable <port_number>
switch:admin> licenseport --release <port_number>
switch:admin> licenseport --release <range_of_port_numbers>

手順2:ポートライセンスの予約
  • ポートのライセンスを予約すると、ポートがオンラインかオフラインかに関係なく、そのポートにPODライセンスが割り当てられます。

switch:admin> licenseport --reserve <port_number>

switch:admin> licenseport --reserve <range_of_port_numbers>

  • portShow コマンドを実行して、ポートのライセンスが設定されていることを確認します。
  • portEnable <portnumber> コマンドを実行して、ポートを有効にします。

追加情報

  • アクティブポートが現在のPODライセンスプールを使い果たした場合、追加ポートにライセンスを割り当てることはできません。

switch:admin> licenseport --show
  24 ports are available in this switch
-->スイッチ上のポートの総数(合計24ポート)


  Ports on Demand license is installed
   Dynamic POD method is in use 
-->これは'スイッチにDynamic PODがインストールされていることを示しています

16 port assignments are provisioned for use in this switch:->  合計16ポート(ライセンス- PODおよびベーススイッチの許容数を含む)

8 port assignments are provisioned by the base switch allowance -> 16個のうち、 8個の ポート割り当てをベーススイッチに割り当てることができます。

8 port assignments are provisioned by the Ports on Demand license-->8つのポート割り当ての残りはPODで使用可能

 16 ports are assigned to the base switch allowance or installed licenses:
     8 ports are assigned to the Ports on Demand base switch allowance
     8 ports are assigned to the Ports on Demand license
  ports assigned to the base switch allowance:
   0, 1, 2, 4, 5, 8, 9, 19
  ports assigned to the Ports on Demand license:
   3, 6, 12, 13, 15, 16, 17, 18
  ports that are not assigned:
   7, 10, 11, 14, 20, 21, 22, 23
 0 license reservations are still available for use by unassigned ports

  • お客様は、アカウント担当者と協力して、残りのポートを有効にするために追加の8ポートポッドを調達する必要があります。

Brocade ライセンスの ユーザガイドを参照

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.