メインコンテンツまでスキップ

「 network fcp zone show 」コマンドを実行した後、 Brocade スイッチの機能が低下し、定義済みの設定が空になりました

Views:
162
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade
Last Updated:

環境

  • Brocade FCスイッチ
  • vfos 8.2.1 ~ v8.2.1d
  • vfos 8.2.2 ~ v8.2.2B
  • Emulex ターゲットポート( ONTAP 9.7P4 より前)
  • QLogic ターゲットポート( ONTAP 9.8 より前)

問題

  • network fcp zone showQlogic ポート( ONTAP 9.8 より前)または Emulex ポート( ONTAP 9.7P4 より前)で「」コマンドを発行すると、原因は、制限された応答ペイロードサイズ( 4096 バイト)を使用するようにスイッチに要求する GAZS 要求フレームを送信します。  
  • 要求された切り捨てのオフセットがアクティブなゾーニングデータベース内の特定の場所にあると、次のような状況が発生することがあります。
    • Brocade GAZS ACC には、誤ったフィールドが含まれている可能性があります。
    • この場合 ' ゾーン・データベースもコマンドの処理後に破損し ' ゾーン・メンバー・リストの最後に追加のセミコロンが残されます(上記のように ' その後に追加の文字を使用するかどうかにかかわらず)  
    • この破損したゾーニング設定を有効にすると、ファブリック内のデバイスへのトラフィックに影響する可能性もあります。
    • 壊れnetwork fcp zone showた GAZS ACC は、「」コマンドが発行されたネットアップコントローラをパニック状態にするために原因を実行する場合があります。

この問題には次のような現象があります。 

  • 定義済みゾーン設定 DB が削除され、 HA 同期が失われ、スタンバイ CP でエラーが発生していることを確認します
  • ファブリックは「セグメントゾーンの競合」という理由でセグメント化されている
  • ログのエラー:

2020/03/27-10:46:03, [ZONE-1062], 2850, FID 128, WARNING, switch, Defined and Effective zone configurations are inconsistent.
2020/03/27-10:46:17, [RCS-1006], 2851, FID 128, INFO, switch, State 2, Application Zoning AD0, RCS CM. Domain 7 returned 0x8. App Response Code 3.
2020/03/27-10:46:17, [ZONE-1019], 2852, FID 128, ERROR, switch, Transaction Commit failed.  Reason code 3 (3) - "Sfc Was Rejected: Remote Switch Unable To Process".

  •  ゾーンメンバーリストの末尾には、セミコロンが追加されています

clipboard_ebb9965821d74c49210598dcec23dc40c.png

  • ゾーンメンバーリストの末尾に追加のセミコロンが残っており、その後に追加の文字が続きます(つまり、有効なエイリアスエントリではありません)。

clipboard_e885f897f2aa9d0527ca3a7198fd76d90.png

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.