メインコンテンツまでスキップ

マルチパス I/O ( MPIO )を使用した AIX ファイバチャネル構成の確認方法

Views:
182
Visibility:
Public
Votes:
1
Category:
flexpod-with-infrastructure-automation
Specialty:
san
Last Updated:

環境

  • ONTAP 
  • AIXホスト

説明

ネットアップの「dotpaths」プラグインではなくALUAを使用している場合は sanlun lun show -p 、すべての「AIX MPIO Path Priority」の設定が「1」と表示されます。
「dotpaths」プラグインが使用されていない場合のAIX MPIOパス優先度を評価しています。
 syslogおよびEMSメッセージ:
[hostname: scsitarget.partnerPath.misconfigured:error]: FCP Partner Path Misconfigured.
[hostname: scsitarget.partnerPath.misconfigured:error]: FCP Partner Path Misconfigured - Host I/O access through a non-primary and non-optimal path was detected.

このエラー・メッセージの詳細については、「 What do FCP Partner Path misconfigured messages mean?」を参照してください。

用語: 

  • Partner Path:パートナーノードを使用してローカルノードでホストされるLUNにアクセスするLUNへのパス。LUNがアクティブ/アクティブクラスタに含まれている。
  • 非プライマリパス:パートナーパス、プロキシパス、およびセカンダリパスと同義です。いずれも非プライマリパスの例です。
  • FCP target port:ホストにFCPサービスを提供するFibre Channelインターフェイス。
  • Virtual Target Interconnect(VTIC) -イニシエータグループリストに表示される仮想FCPターゲットインターフェイス。VTICは、イニシエータがセカンダリパスにアクセスできることを示すために使用されます。

概要of the問題:
SANでは、ホストがLUNにアクセスできるようにするために複数のパスが提供されることがよくあります。SANの冗長性を最大限に高めるには、ホストオペレーティングシステムでMultipathing IO(MPIO;マルチパスIO)ソフトウェアを使用する必要があります。MPIOソフトウェアは、使用可能なすべてのパスを監視し、 オペレーティングシステムに使用するパスを決定します。AIXホストでは、組み込みの標準マルチパスソフトウェアまたはVeritas Dynamic Multipathing(DMP)ソフトウェアを使用できます。次のプロセスでは、MPIO構成を確認する方法の概要を説明します。MPIO構成の設定手順については 、FCP AIX Host Utilitiesを参照してください。以下のプロセスでは、 sanlunコマンドを提供するAIX Host Utilitiesソフトウェアパッケージがホストにインストールされていることを前提としています。

注: AIX仮想IOサーバーは  dotpathssanlun、padminアカウントを使用している場合、やなどのコマンドを認識しません。これらのコマンドを実行するには oem_setup_env 、モードを使用する必要があります。oem_setup_env 仮想IOサーバ環境の詳細については、AIXのドキュメントを参照してください。

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.