メインコンテンツまでスキップ

NetApp_Insight_2020.png 

デバイス(「イーサネット:レンチ・ポート」)が PCI バスで検出されませんでした

Views:
9
Visibility:
Public
Votes:
0
Category:
aff-series
Specialty:
hw
Last Updated:

に適用されます

  • AFF-A200
  • FAS2650
  • ONTAP

問題

  • ONTAP のブート時に、次のようなエラーが表示され、システムが POST に失敗することがあります。
  • ノードのブート時に次のエラーが報告され、 LOADER プロンプトが表示されます。


Device ("Ethernet:Wrench Port" ) not detected on PCI BUS.
Device could be purposely held in reset or has developed a physical defect or has a corrupt firmware.
 
Halting the system because the device is critical for normal operations. Bootarg no-onboard-pcidev-check? can skip this check.
Halting...
 
BIOS Version: 11.0.2
Portions Copyright (C) 2014-2016 NetApp, Inc. All Rights Reserved.
 
Initializing System Memory ...
Loading Device Drivers ...
Configuring Devices ...
 
CPU = 1 Processor(s) Detected.
  Intel(R) Xeon(R) CPU D-1528 @ 1.90GHz (CPU 0)
  CPUID: 0x00050663. Cores per Processor = 6
32768 MB System RAM Installed.
SATA (AHCI) Device: SV9MST6D120GLM41NP
 
Boot Loader version 6.0
Copyright (C) 2000-2003 Broadcom Corporation.
Portions Copyright (C) 2002-2016 NetApp, Inc. All Rights Reserved.
 
BIOS POST Failure(s) detected: PCIe device missing error detected. Abort AUTOBOOT

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support