メインコンテンツまでスキップ
We are redesigning the NetApp Knowledge Base site to make it easier to use and navigate. The new and improved site will be available the first week of October. Check out our video or read this KB article to know more about changes you’ll see on the site.

SG57xx NVRAM および SFP の StorageGRID Webscale アプライアンスインストーラファームウェアバージョン 2.0.0 を 2.0.1 にアップグレードする方法が正しくありません

Views:
13
Visibility:
Public
Votes:
0
Category:
storagegrid-webscale
Specialty:
sgrid
Last Updated:

環境

  • StorageGRIDアプライアンス    
  • StorageGRID Webscale 

概要


この記事では、 SG5712 および SG5760 ( E5700SG とも呼ばれます)を StorageGRID Webscale アプライアンスインストーラ 2.0.1 にアップグレードする手順について説明しています。このアップグレードでは、 Support_Bulletins に記載されている問題を解決します。  

SU298 : StorageGRID Webscale SG57XX ソフトウェアインストーラ 2.0.0 の導入設定が正しくありません

README.txt

Important: Please Read
======================
 
NOTE: StorageGRID Webscale Appliances come from the factory preinstalled with all necessary firmware. You do not need to, and should not, manually apply a StorageGRID Webscale Appliance firmware upgrade or downgrade, unless you are instructed to do so by NetApp support. In that event, you can find all current versions of the StorageGRID Appliance firmware in this zip archive.
 
NOTE: This archive contains firmware for the E5600SG controller in a StorageGRID Webscale Appliance (SG56xx).  If you need to upgrade the firmware in the E2700 controller, you must contact NetApp Technical Support to obtain the correct firmware download files, including the StorageGRID Webscale Appliance version of the E2700 NVSRAM download, which has a -SG1.dlp suffix.  DO NOT apply any other E2700 NVSRAM loads to the E2700 controller in a StorageGRID Webscale Appliance.
 
NOTE: This archive contains firmware for the E5700SG controller in a StorageGRID Webscale Appliance (SG57xx).  If you need to upgrade the firmware in the E2800 controller, you must contact NetApp Technical Support to obtain the correct firmware download files, including the StorageGRID Webscale Appliance version of the E2800 NVSRAM download, which has a -SG2.dlp suffix. DO NOT apply any other E2800 NVSRAM loads to the E2800 controller in a StorageGRID Webscale Appliance (SG57xx).
 
NOTE: This firmware can only be applied to StorageGRID Webscale Appliances that are in a preinstalled state.  If you have already installed StorageGRID Webscale software on your StorageGRID Webscale Appliances, firmware upgrades or downgrades to the version used by your StorageGRID Webscale software release will be applied automatically by the system.  No further action is required.

 

Contents of this Archive
========================
 
1.  StorageGRID-Webscale-Appliance-Firmware/README.txt
 
    This file.
 
2.  StorageGRID-Webscale-Appliance-Firmware/E5600SG
 
    Subdirectories containing StorageGRID Webscale Appliance firmware versions  for the E5600SG controller in a StorageGRID Webscale Appliance (SG56xx).
 
3.  StorageGRID-Webscale-Appliance-Firmware/E5600SG/Version-1.3-for-SGWS-10.2
 
    File Size   File Name
           85   NetApp-PGE_1.3.0-20150422.1458.a2bf977.bin.sha1
    336422351   NetApp-PGE_1.3.0-20150422.1458.a2bf977.bin.tar.bz2
 
    Installer firmware image (.tar.bz2) and firmware image SHA1 signature  (.bin.sha1) for StorageGRID Webscale Appliance Installer firmware version  1.3.0.
 
    Use this firmware with systems running StorageGRID Webscale version 10.2.
 
4.  StorageGRID-Webscale-Appliance-Firmware/E5600SG/Version-1.6-for-SGWS-10.3
 
    File Size   File Name
           85   NetApp-PGE_1.6.0-20160413.1739.3810b38.bin.sha1
    306800581   NetApp-PGE_1.6.0-20160413.1739.3810b38.bin.tar.bz2
 
    Installer firmware image (.tar.bz2) and firmware image SHA1 signature  (.bin.sha1) for StorageGRID Webscale Appliance Installer firmware version 1.6.0.
 
    Use this firmware with systems running StorageGRID Webscale version 10.3.
 
5.  StorageGRID-Webscale-Appliance-Firmware/E5600SG/Version-1.7-for-SGWS-10.4
 
    File Size   File Name
           85   NetApp-PGE_1.7.0-20170209.2006.782b44c.bin.sha1
    425080246   NetApp-PGE_1.7.0-20170209.2006.782b44c.bin.tar.bz2
 
    Installer firmware image (.tar.bz2) and firmware image SHA1 signature  (.bin.sha1) for StorageGRID Webscale Appliance Installer firmware version  1.7.0.
 
    Use this firmware with systems running StorageGRID Webscale version 10.4.
 
6.  StorageGRID-Webscale-Appliance-Firmware/E5600SG/Version-2.0-for-SGWS-11.0
 
    File Size   File Name
           85   NetApp-PGE_2.0.1-20180103.2049.e7f61c1.bin.sha1
    447921955   NetApp-PGE_2.0.1-20180103.2049.e7f61c1.bin.tar.bz2
 
    Installer firmware image (.tar.bz2) and firmware image SHA1 signature  (.bin.sha1) for StorageGRID Webscale Appliance Installer firmware version 2.0.1.
 
    Use this firmware with systems running StorageGRID Webscale version 11.0.
 
7.  StorageGRID-Webscale-Appliance-Firmware/E5700SG
 
    Subdirectories containing StorageGRID Webscale Appliance firmware versions  for the E5700SG controller in a StorageGRID Webscale Appliance (SG57xx).
 
8. StorageGRID-Webscale-Appliance-Firmware/E5700SG/Version-2.0-for-SGWS-10.3-through-11.0
 
    File Size   File Name
           85  NetApp-PGE_2.0.1-20180103.2049.e7f61c1.bin.sha1
    447921955  NetApp-PGE_2.0.1-20180103.2049.e7f61c1.bin.tar.bz2
 
    Installer firmware image (.tar.bz2) and firmware image SHA1 signature (.bin.sha1) for StorageGRIDWebscale Appliance Installer firmware version 2.0.1.
 
    Use this firmware with systems running StorageGRIDWebscale version 10.3, 10.4, and 11.0.

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support