メインコンテンツへスキップ

正常なEOFがしきい値を超えているため、Brocadeスイッチでブレードが故障状態になる

Views:
12
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade
Last Updated:

環境

Brocadeスイッチ

問題

  • Brocadeスイッチのスロット6のブレードが障害状態になります。
  • Brocadeスイッチのスロット6のチップ/ブレードのスイッチポートの1つがCRC errors with GoodEOF のしきい値を超えています。
  • BrocadeスイッチのErrdump で以下のイベントが報告されます-
 2024/11/15-02:27:19 (IST), [C4-1030], 12084732, SLOT 1 | CHASSIS | PORT 6/4, WARNING, Switch, S6,P-1(20): Internal CRC with good EOF errors exceeded threshold, tuning is required. current:0x19, last:0xf000000b thresh2:0x9000000a. 2024/11/15-02:27:19 (IST), [C4-1056], 12084733, SLOT 1 | CHASSIS, CRITICAL, Switch, Chip in Slot 6, Chip 0 getting faulted with reason 52. 2024/11/15-02:27:20 (IST), [EM-1134], 12084734, SLOT 1 | FFDC | CHASSIS, ERROR, Switch, Slot 6 set to faulty, rc=20015. 2024/11/15-02:27:20 (IST), [RAS-1001], 12084735, SLOT 1 | CHASSIS, INFO, Switch, First failure data capture (FFDC) event occurred. 2024/11/15-02:27:20 (IST), [MAPS-1002], 12084736, SLOT 1 | FID 128, ERROR, Switch, Blade 6, Condition=ALL_SLOTS(BLADE_STATE/NONE==FAULTY), Current Value:[BLADE_STATE, FAULTY], RuleName=defALL_SLOTSBLADE_STATE_FAULTY, Dashboard Category=Fru Health, Quiet Time=None. 2024/11/15-02:27:50 (IST), [MAPS-1021], 12084738, SLOT 1 | FID 128, WARNING, Switch, RuleName=defCHASSISFAULTY_BLADE_1, Condition=CHASSIS(FAULTY_BLADE/NONE>=1), Obj:Chassis [FAULTY_BLADE,1] has contributed to switch status MARGINAL. 2024/11/15-02:27:50 (IST), [MAPS-1020], 12084739, SLOT 1 | FID 128, WARNING, Switch, Switch wide status has changed from HEALTHY to MARGINAL.
  • Slotshow -m スロット6のスイッチブレードを次のように報告します。 Faulty-
 /fabos/cliexec/slotshow -m: Slot Blade Type ID Model Name Status -------------------------------------------------- 1 CP BLADE 175 CPX6 ENABLED 2 CP BLADE 175 CPX6 ENABLED 3 SW BLADE 178 FC32-48 ENABLED 4 SW BLADE 178 FC32-48 ENABLED 5 SW BLADE 178 FC32-48 ENABLED 6 SW BLADE 178 FC32-48 FAULTY (21) 7 CORE BLADE 177 CR32-8 ENABLED 8 CORE BLADE 177 CR32-8 ENABLED 9 SW BLADE 178 FC32-48 ENABLED 10 SW BLADE 178 FC32-48 ENABLED 11 SW BLADE 178 FC32-48 ENABLED 12 SW BLADE 178 FC32-48 ENABLED

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.