メインコンテンツまでスキップ

「Onboard:Quad Port 12G SAS」というメッセージが、sldiagテスト出力およびテストシステムのテストメニューおよび負荷テストメニューに表示されません

Views:
21
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

環境

  • FAS8300
  • AFF-A400
  • 9.13.1より前のONTAP

問題

  • SASでポート0a~0c、0b~0dを接続sldiagOnboard: Quad Port 12G SAS""を含まない出力:

Setting LAN IP Address to 192.xxx.xxx.xxx
Setting LAN Subnet Mask to 255.255.255.0
Copyright (c) 2019 NetApp Inc. All rights reserved.
FAS8300 System-Level HW Diagnostics 04.05.09
#### System        PN: xxx-xxxxx                    ####
#### System        SN: xxxxxxxxxxxx                 ####
#### Controller-B  PN: xxx-xxxxx                    ####
#### Controller-B  SN: xxxxxxxxxxxx                 ####
1) Scan System
2) Test System (must scan system, first)
3) Test Memory (must scan system, first)
4) Stress-Test System (must scan system, first)
5) Show VPD Information
6) Show FW Revision
7) Show MAC Address
8) Show Logs
9) Reboot (BMC Power Cycle) Controller to LOADER

Select a number 1-9 to execute the respective command: 1

System Scan Start: 2023-01-23 00:27:55
=======================================================
BMC:
Device ID   Device Rev.   FW Rev.   IPMI Ver.   Device Available
32          1             13.07     2.0         yes
=======================================================
Onboard: Dual Port 25GbE RoCE NIC:
Interface      Link  Speed        FW Version
e0a            Up    25000Mb/s    16.26.4012 (NAP0000000006)
e0b            Up    25000Mb/s    16.26.4012 (NAP0000000006)
=======================================================
Onboard: Dual Port 100GbE RoCE NIC:
Interface      Link  Speed        FW Version
e0c            Up    100000Mb/s   16.26.4012 (NAP0000000005)
e0d            Up    100000Mb/s   16.26.4012 (NAP0000000005)
=======================================================

 

  • Onboard: Quad Port 12G SAS""は Test System 、およびにも表示されません Stress-Test


+--------------------------------Test System-----------------------------------+
| Select one or more items to test using the SPACE bar to toggle the option.   |
| Use Arrow keys to move up/down to select invidiual test. Use Arrow keys      |
| left/right to select Test Control. Press [Enter] to execut.                  |
| +--------------------------------------------------------------------------+ |
| |[ ] a. CPU Test                              (Register read test)         | |
| |[ ] b. TPM Test                              (Self-test)                  | |
| |[ ] c. Ethernet I210 Test                    (Internal loopback test)     | |
| |[ ] d. BMC Test                              (Self-test/Sensor status chec| |
| |[ ] e. PSU Test                              (Sensor status check)        | |
| |[ ] f. PCH-I2C Test                          (Device read test)           | |
| |[ ] g. Fan Test                              (Fan speed control test)     | |
| |[ ] h. Onboard: Dual Port 25GbE RoCE NIC Test(BIST/External loopback test)| |
| |[ ] i. Onboard: Dual Port 100GbE RoCE NIC Tes(BIST/External loopback test)| |
| |[ ] j. Mezz: Quad Port 25GbE RoCE NIC Test   (BIST/External loopback test)| |
| |[ ] k. HBA: Dual Port 10GbE NIC Test         (BIST/External loopback test | |
| |[ ] l. HBA: Dual Port 10GbE NIC Test         (BIST/External loopback test | |
| +--------------------------------------------------------------------------+ |
|                                                                              |
|                                                                              |
|                                                                              |
+------------------------------------------------------------------------------+
|                                                                              |
+------------------------------------------------------------------------------+
<   OK  ><Test all>< Cancel >a(Register read test)
    
+-----------------------------Stress Test System-------------------------------+
| Select one or more items to test using the SPACE bar to toggle the option.   |
| Use Arrow keys to move up/down to select invidiual test. Use Arrow keys      |
| left/right to select Test Control. Press [Enter] to execut                   |
| +--------------------------------------------------------------------------+ |
| |[ ] a. CPU Stress                                 (CPU stress)            | |
| |[ ] b. Memory Stress                              (Random pattern test)   | |
| |[ ] c. M.2 SATA Drive Stress                      (Read operation test)   | |
| |[ ] d. M.2 NVMe Drive Stress                      (Read operation test)   | |
| |[ ] e. Onboard: Dual Port 25GbE RoCE NIC Stress   (External loopback test)| |
| |[ ] f. Onboard: Dual Port 100GbE RoCE NIC Stress  (External loopback test)| |
| |[ ] g. Mezz: Quad Port 25GbE RoCE NIC Stress      (External loopback test)| |
| |[ ] h. HBA: Dual Port 10GbE NIC Stress            (External loopback test)| |
| |[ ] i. HBA: Dual Port 10GbE NIC Stress            (External loopback test)| |
| +--------------------------------------------------------------------------+ |
|                                                                              |
|                                                                              |
|                                                                              |
+------------------------------------------------------------------------------+
|                                                                              |
+------------------------------------------------------------------------------+
<   OK  ><Test all>< Cancel ><><><><>Press [Enter] key to go back to Main Menu

  • すべてのSASポートは、LOADERから、またはステータスチェック時にブート後に機能しています。

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.