メインコンテンツへスキップ

FAS9000 、 AFF A700 、および AFF A900 のアダプタカードが、交換後に sysconfig に紛失しています

Views:
38
Visibility:
Internal
Votes:
0
Category:
ontap-9
Specialty:
hw<a>FSE</a>
Last Updated:

環境

  • ONTAP 9
  • FAS9000
  • AFF A700
  • AFF A900 の略
  • FRU の交換( NIC 、 SAS 、または FC アダプタ)

問題

アダプタカード( NIC 、 SAS 、 FC アダプタなど)を交換すると、 ONTAP がカードを認識できなくなります。  システムに存在するように表示されなくなります。

  • アダプタカード交換前の AutoSupport sysconfig -ac の出力結果(スロット 1 が存在):

sysconfig: slot 1 OK: X91440A: 40G high performance
sysconfig: slot 2 OK: X91143A: Qlogic EP8324 Quad-Port 16Gb FC/10GbE PCIe CNA
sysconfig: slot 3 OK: X92071A: PMC PM8072; PCI-E quad-port SAS (PM8072)
sysconfig: slot 4 OK: X91440A: 40G high performance
sysconfig: slot 5 OK: X92071A: PMC PM8072; PCI-E quad-port SAS (PM8072)
sysconfig: slot 6 OK: X93140A: NetApp NVRAM10
sysconfig: slot 6-1 OK: X9172A: Flash Cache, 4.0TB NVMe SSD
sysconfig: slot 6-2 OK: X9172A: Flash Cache, 4.0TB NVMe SSD
sysconfig: slot 7 OK: X92071A: PMC PM8072; PCI-E quad-port SAS (PM8072)
sysconfig: slot 8 OK: X91440A: 40G high performance
sysconfig: slot 9 OK: X92071A: PMC PM8072; PCI-E quad-port SAS (PM8072)
sysconfig: slot 10 OK: X91143A: Qlogic EP8324 Quad-Port 16Gb FC/10GbE PCIe CNA
sysconfig: slot 11 OK: X92071A: PMC PM8072; PCI-E quad-port SAS (PM8072)
sysconfig: No shelf configuration errors detected.
sysconfig: There are no configuration errors.

  • アダプタカード交換後の AutoSupport sysconfig -ac の出力結果(スロット 1 が欠落している):

sysconfig: slot 2 OK: X91143A: Qlogic EP8324 Quad-Port 16Gb FC/10GbE PCIe CNA
sysconfig: slot 3 OK: X92071A: PMC PM8072; PCI-E quad-port SAS (PM8072)
sysconfig: slot 4 OK: X91440A: 40G high performance
sysconfig: slot 5 OK: X92071A: PMC PM8072; PCI-E quad-port SAS (PM8072)
sysconfig: slot 6 OK: X93140A: NetApp NVRAM10
sysconfig: slot 6-1 OK: X9172A: Flash Cache, 4.0TB NVMe SSD
sysconfig: slot 6-2 OK: X9172A: Flash Cache, 4.0TB NVMe SSD
sysconfig: slot 7 OK: X92071A: PMC PM8072; PCI-E quad-port SAS (PM8072)
sysconfig: slot 8 OK: X91440A: 40G high performance
sysconfig: slot 9 OK: X92071A: PMC PM8072; PCI-E quad-port SAS (PM8072)
sysconfig: slot 10 OK: X91143A: Qlogic EP8324 Quad-Port 16Gb FC/10GbE PCIe CNA
sysconfig: slot 11 OK: X92071A: PMC PM8072; PCI-E quad-port SAS (PM8072)
sysconfig: No shelf configuration errors detected.
sysconfig: There are no configuration errors.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

This is an internal KB article and its content should not be copy/pasted and shared with people outside of NetApp. Always seek Duty Manager authentication of caller for password reset requests. If you need further assistance post a question in Knowledge Xchange