メインコンテンツへスキップ

部分的なギブバックステータスの MB を置き換えたあと、 disk show -v コマンドでディスクを認識できません

Views:
2
Visibility:
Internal
Votes:
0
Category:
fas-systems
Specialty:
HW
Last Updated:

に適用されます

  • ONTAP 9
  • AFF A300

問題

  • ノード( node01 )はパニックを発生させ、パートナーノード( node00 )に引き継がれます。

コンソールログの例:

PANIC  : PCI Error NMI from device(s):RPT(0,3,0):QLogic FC/10GbE CNA on Controller. 
version: 9.1P11: Thu Dec 21 02:32:26 PST 2017
conf   : x86_64.optimize
cpuid = 9
KDB: stack backtrace:
panic() at panic+0x5f8
platform_ifname_hidden() at platform_ifname_hidden+0x612
psl_reconstruct_sysconfig_list() at 0xffffffff81404dfe
generic_nmi_handler() at generic_nmi_handler+0xb8
trap() at trap+0x38c
Xnmi() at Xnmi+0xcf
cpu_idle() at cpu_idle+0x55
sched_idletd() at sched_idletd+0x1d5
fork_exit() at fork_exit+0x181
fork_trampoline() at fork_trampoline+0xe
--- trap 0, rip = 0, rsp = 0xffffff83e4d49cf0, rbp = 0 ---
Uptime: 52s
coredump: primary dumper unavailable.
coredump: secondary dumper unavailable.
System halting...

  • ギブバックが機能せず、 node01 が再び停止します。
  • ギブバックが失敗すると、システムは次のように部分的なギブバックステータスとして表示されます。

クラスタシェルの例:

Cluster::> storage failover show
 Takeover      
Node       Partner     Possible State Description  
-------------- -------------- -------- -------------------------------------
node00     node01- false   Waiting for node01,Partial giveback, Takeover is not
                    possible: NVRAM log not synchronized
node01     node00- -     Dumping sparecore
2 entries were displayed.

  • ノード 01 の MB を交換したあと"disk show -v"、メンテナンスモードではディスクが表示されません。

例:

*> disk show -v
Local System ID: 987654321

disk show: No disks attached to system.

  • ONTAP は"boot_ontap"「」のために起動できNo root volume found"ず、リブートを続行しています。

例:

Storage Adapters found:
0 Fibre Channel Storage Adapters found!
4 SAS Adapters found!
0 Parallel SCSI Storage Adapters found!
0 ATA Adapters found!

add host 127.0.10.1***OS2SP configure e0S successfully***
: gateway 127.0.20.1

Select option 4 from the boot menu to choose disks for the root volume and spare core space.
Target Adapters found:
4 Fibre Channel Target Adapters found!
0 iSCSI Target Adapters found!

WARNING: there do not appear to be any disks attached to the system.
No root volume found.
Rebooting... (press ctrl-c during boot to break reboot loop)
Uptime: 1m54s
System rebooting...

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

This is an internal KB article and its content should not be copy/pasted and shared with people outside of NetApp. Always seek Duty Manager authentication of caller for password reset requests. If you need further assistance post a question in Knowledge Xchange