メインコンテンツへスキップ

障害エラーメッセージ:フラッシュで最適化されたノードではディスクを使用できません

Views:
45
Visibility:
Internal
Votes:
0
Category:
ontap-9
Specialty:
HW
Last Updated:

のしんだ

環境

  • AFFプラットフォーム
  • FASプラットフォーム
  • ONTAP

問題

FAS システムにハードディスクドライブを追加すると、次の EMS ログが報告されます。

Disk %s cannot be used on a node configured as Flash Optimized.

The disk should be removed from the system.

sysconfig -a コマンドで次の出力が表示されます。

slot 0: SAS Host Adapter 0a (PMC-Sierra PM8001 rev. C, SAS, <UP>)
Firmware rev:       01.11.07.00
Base WWN:           5:00a098:0035310:20
Phy State:        [0] Enabled, 6.0 Gb/s
                  [1] Enabled, 6.0 Gb/s
                  [2] Enabled, 6.0 Gb/s
                  [3] Enabled, 6.0 Gb/s
QSFP Vendor:        Molex Inc.
QSFP Part Number:   112-00177+A0
QSFP Type:          Passive Copper 2m ID:00
QSFP Serial Number: 132720554

                  00.0 : NETAPP   X302_HJUPI01TSSM NA04 847.5GB 512B/sect (Failed-Unsupported)
                  00.1 : NETAPP   X302_HJUPI01TSSM NA04 847.5GB 512B/sect (Failed-Unsupported)
                  00.2 : NETAPP   X302_HJUPI01TSSM NA04 847.5GB 512B/sect (Failed-Unsupported)
                  00.3 : NETAPP   X302_HJUPI01TSSM NA04 847.5GB 512B/sect (Failed-Unsupported)
                  00.4 : NETAPP   X302_HJUPI01TSSM NA04 847.5GB 512B/sect (Failed-Unsupported)
                  00.5 : NETAPP   X302_HJUPI01TSSM NA04 847.5GB 512B/sect (Failed-Unsupported)
                  00.6 : NETAPP   X302_HJUPI01TSSM NA04 847.5GB 512B/sect (Failed-Unsupported)
                  00.7 : NETAPP   X302_HJUPI01TSSM NA04 847.5GB 512B/sect (Failed-Unsupported)
                  00.8 : NETAPP   X302_HJUPI01TSSM NA04 847.5GB 512B/sect (Failed-Unsupported)
                  00.9 : NETAPP   X302_HJUPI01TSSM NA04 847.5GB 512B/sect (Failed-Unsupported)
                  00.10: NETAPP   X302_HJUPI01TSSM NA04 847.5GB 512B/sect (Failed-Unsupported)
                  00.11: NETAPP   X302_HJUPI01TSSM NA04 847.5GB 512B/sect (Failed-Unsupported)

01.0 : NETAPP   X443_PLS15150A01 NQ10 142.8GB 520B/sect (66640)
01.1 : NETAPP   X443_PLS15150A01 NQ10 142.8GB 520B/sect (66645)
01.2 : NETAPP   X443_PLS15150A01 NQ10 142.8GB 520B/sect (66612)
01.3 : NETAPP   X443_PLS15150A01 NQ10 142.8GB 520B/sect (66621)
01.3 : NETAPP   X443_PLS15150A01 NQ10 142.8GB 520B/sect (66531)
Shelf 0: DS4246 Firmware rev. IOM6 A: 0173 IOM6 B: 0173
Shelf 1: DS4246 Firmware rev. IOM6 A: 0173 IOM6 B: 0173


storage disk show コマンドで次の出力が表示されます。

Usable                 Disk           Container   Container
Disk                   Size Shelf Bay Type       Type        Name      Owner
---------------- ---------- ----- --- -------    ----------- --------- --------
1.0.0                     -    11   0 MSATA      Unsupported -         -
1.0.1                     -    11   0 MSATA      Unsupported -         -
1.0.2                     -    11   0 MSATA      Unsupported -         -
1.0.3                     -    11   0 MSATA    Unsupported -         -
1.0.4                     -    11   0 MSATA    Unsupported -         -
1.0.5                     -    11   0 MSATA      Unsupported -         -

storage disk error show コマンドで次の出力が表示されます。

Disk             Error Type        Error Text
---------------- ----------------- --------------------------------------------
2.3.0            persona-mismatch  The node is configured with flash optimized personality and this disk is not SSD. The Disk needs to be removed.
2.3.1            persona-mismatch  The node is configured with flash optimized personality and this disk is not SSD. The Disk needs to be removed.
2.3.2            persona-mismatch  The node is configured with flash optimized personality and this disk is not SSD. The Disk needs to be removed.
2.3.3            persona-mismatch  The node is configured with flash optimized personality and this disk is not SSD. The Disk needs to be removed.
2.3.4            persona-mismatch  The node is configured with flash optimized personality and this disk is not SSD. The Disk needs to be removed.
2.3.5            persona-mismatch  The node is configured with flash optimized personality and this disk is not SSD. The Disk needs to be removed.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

This is an internal KB article and its content should not be copy/pasted and shared with people outside of NetApp. Always seek Duty Manager authentication of caller for password reset requests. If you need further assistance post a question in Knowledge Xchange