メインコンテンツへスキップ

新たに導入された SP または BMC への SSH 接続は拒否されました コントローラ

Views:
391
Visibility:
Internal
Votes:
0
Category:
aff-series
Specialty:
hw
Last Updated:

環境

  • AFF モデル
  • FASモデル
  • ONTAP 9
  • サービス プロセッサ(SP)
  • Baseboard Management Controller(BMC)
  • BIOS

問題

シナリオ
  • ONTAP を起動する前に新しく設置したシステム
  • ONTAP を起動する前にマザーボードを交換してください
  • SP または BMC で Wipeclean を実行
状況
シナリオリストに記載されたコントローラの SP / BMC IP アドレスに SSH 接続しようとすると、次のような結果になります。
 
ssh -l admin 10.10.10.10
ssh: connect to host 10.10.10.10 port 22: Connection refused
 
SSH の試行時にコントローラのシリアルコンソールに接続した場合は、次のようなエラーが出力に表示されます。
 
[200912345678][123:456:easyinitd][WARN][easyinitd_wdt.c:monitor_service:119]sshd is not started yet, might still generate keys
sh: can't kill pid 11111: No such process
network: Secure Port is enabled for [ssh] with 22
Unable to load host key "/etc/ssh/ssh_host_rsa_key": invalid format
Unable to load host key "/etc/ssh/ssh_host_rsa_key": invalid format
Unable to load host key: /etc/ssh/ssh_host_rsa_key
Unable to load host key "/etc/ssh/ssh_host_dsa_key": invalid format
Unable to load host key "/etc/ssh/ssh_host_dsa_key": invalid format
Unable to load host key: /etc/ssh/ssh_host_dsa_key
Unable to load host key "/etc/ssh/ssh_host_ecdsa_256_key": invalid format
Unable to load host key "/etc/ssh/ssh_host_ecdsa_256_key": invalid format
Unable to load host key: /etc/ssh/ssh_host_ecdsa_256_key
Unable to load host key "/etc/ssh/ssh_host_ecdsa_384_key": invalid format
Unable to load host key "/etc/ssh/ssh_host_ecdsa_384_key": invalid format
Unable to load host key: /etc/ssh/ssh_host_ecdsa_384_key
Unable to load host key "/etc/ssh/ssh_host_ecdsa_521_key": invalid format
Unable to load host key "/etc/ssh/ssh_host_ecdsa_521_key": invalid format
Unable to load host key: /etc/ssh/ssh_host_ecdsa_521_key
sshd: no hostkeys available -- exiting.
 
SecureCRT などのアプリケーションで、接続試行時に次の情報が報告されることがあります。 
 [LOCAL] : RECV: SERVICE_ACCEPT[ssh-userauth] -- OK [LOCAL] : SENT : USERAUTH_REQUEST [none] [LOCAL] : [LOCAL] : RECV: TCP/IP close [LOCAL] : Changing state from STATE_CONNECTION to STATE_CLOSED [LOCAL] : Connected for 5 seconds, 1586 bytes sent, 1079 bytes received [LOCAL] : Stream has closed [CLOSE_TYPE_NONSPECIFIC] : The operation completed successfully. 

 

 

 

 
 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

This is an internal KB article and its content should not be copy/pasted and shared with people outside of NetApp. Always seek Duty Manager authentication of caller for password reset requests. If you need further assistance post a question in Knowledge Xchange