メインコンテンツまでスキップ

「network port show」および「ifstat -a」で、ポート速度が1Gbpsではなく、10Gbpsであると誤って報告されます

Views:
276
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

環境

  • FAS
  • ONTAP 9

問題

  • ポートe0cnetwork port showifstat -a、e0d、e0eは、1Gbpsではなく、「および」に10Gbpsとして表示されます。

network port show

Node: node-1
Speed(Mbps) Health
Port IPspace Broadcast Domain Link MTU Admin/Oper Status
--------- ------------
---------------- ---- ---- ----------- --------
e0c Default - up 1500 auto/10000 healthy 
e0d Default - up 1500 auto/10000 healthy 
e0e Default fogrp 410 up 1500 auto/10000 healthy 

 

ifstat -a

-- interface  e0c  (1 day, 9 hours, 36 minutes, 15 seconds) --
LINK INFO
Speed:      10000M | Duplex:       full | Flowcontrol:     none
-- interface  e0d  (1 day, 9 hours, 36 minutes, 14 seconds) --
LINK INFO
 Speed:      10000M | Duplex:       full | Flowcontrol:     none
-- interface  e0e  (1 day, 9 hours, 36 minutes, 15
LINK INFO
 Speed:      10000M | Duplex:       full | Flowcontrol:     none

  • sysconfig -aおよびifconfig-vvvmは正常に動作します。

sysconfig -a

   slot 0: 1/10 Gigabit Ethernet Controller IX4-T
     e0e MAC Address:   d0:39:ea:1d:ab:d4 (auto-1000t-fd-up)
     e0f MAC Address:   d0:39:ea:1d:ab:d5 (auto-unknown-fd-down)
     e0c MAC Address:   d0:39:ea:1d:ab:d2 (auto-1000t-fd-up)
     e0d MAC Address:   d0:39:ea:1d:ab:d3 (auto-1000t-fd-up)

ifconfig-vvvm

e0c: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
   media: Ethernet autoselect (1000baseT <full-duplex>)
e0d: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
   media: Ethernet autoselect (1000baseT <full-duplex>)
e0e: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
   media: Ethernet autoselect (1000baseT <full-duplex>)

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.