ONTAP 9.16.1リリースを実行しているONTAPクラスタで、System Manager ONTAPの更新イメージの検証エラーが発生する
環境
- ANDU(自動無停止アップグレード)
- ONTAP 9.16.1
- System Manager
問題
9.16.1を実行しているONTAPクラスタをアップグレードしようとすると、System ManagerでONTAPアップグレードイメージを追加したあとにパッケージの検証が失敗し、System Managerに次のメッセージが表示されます。
2 ノード クラスター上。
Validation couldn't be completed due to errors. Fix the errors, and validate again.
Pre-update check Status Message
ScriptExecution x Internal error. Initialization failed
- その後の
cluster image show-update-progressコマンドのコマンドライン出力には、次の出力が表示されます。
::> cluster image show-update-progress
Estimated Elapsed
Update Phase Status Duration Duration
-------------------- ----------------- --------------- ---------------
Pre-update checks failed 00:10:00 00:00:00
Details:
Pre-update Check Status Error-Action
-------------------- ----------------- --------------------------------------
ScriptExecution Error Error: Internal error. Initialization
failed
Action: Verify that all nodes are
healthy using the "cluster show"
command, then try the command again
Overall Status Error Error
2 entries were displayed.
cluster image show-update-logadvanced権限レベルのコマンドの出力にも、「package-management」フェーズ「synch-image」トランザクションの失敗が示されています。
::> set advanced
::*> cluster image show-update-log
Trans
Phase Transaction Id Component Id Time Stamp Status
------------- ------------ ----- ----------------- ----------- ---------------
package- process- 1 cluster1-01 3/26/2025 completed
management package 13:03:22
package- synch-image 2 cluster1-02 3/26/2025 failed
management 13:03:22
validation initialize 3 MUM 3/26/2025 failed
13:05:01
Details: Error: Internal error. Initialization failed, Action: Verify that
all nodes are healthy using the "cluster show" command, then try
the command again.
validation mount-image 4 cluster1-01 3/26/2025 completed
13:05:01
validation mount-image 5 cluster1-02 3/26/2025 completed
13:05:01
validation run-scripts 6 cluster1-01 3/26/2025 completed
13:05:01
validation run-scripts 7 cluster1-02 3/26/2025 failed
13:05:01
Details: Error: Internal error. Initialization failed, Action: Verify that
all nodes are healthy using the "cluster show" command, then try
the command again.
validation complete- 8 MUM 3/26/2025 completed
validation 13:05:01
8 entries were displayed.
::*>
2 つ以上のノードを持つクラスターの場合:
Validation couldn't be completed due to errors. Fix the errors, and validate again.
Pre-update check Status Message
MountPackage Error Error: Failed to mount the package
- その後の
cluster image show-update-progressコマンドのコマンドライン出力には、次の出力が表示されます。
::> cluster image show-update-progress
Estimated Elapsed
Update Phase Status Duration Duration
-------------------- ----------------- --------------- ---------------
Pre-update checks failed 00:10:00 00:00:00
Details:
Pre-update Check Status Error-Action
-------------------- ----------------- --------------------------------------
MountPackage Error Error: Failed to mount the package
Action: Run the "cluster image
package show-repository" command to
check if the package version is
correct and available
cluster image show-update-logadvanced権限レベルのコマンドの出力にも、「package-management」フェーズ「synch-image」トランザクションの失敗が示されています。
::> set advanced
::*> cluster image show-update-log
Trans
Phase Transaction Id Component Id Time Stamp Status
------------- ------------ ----- ----------------- ----------- ---------------
package- process- 1 cluster1-01 3/26/2025 completed
management package 13:03:22
package- synch-image 2 cluster1-03 3/26/2025 completed
management 13:03:22
validation initialize 3 MUM 3/26/2025 failed
13:05:01
Details: Error: Failed to mount the package, Action: Run the "cluster image
package show-repository" command to check if the package version is
correct and available.
validation mount-image 4 cluster1-01 3/26/2025 completed
13:05:01
validation mount-image 5 cluster1-02 3/26/2025 completed
13:05:01
validation mount-image 6 cluster1-03 3/26/2025 completed
13:05:01
validation mount-image 7 cluster1-04 3/26/2025 failed
13:05:01
Details: Error: Failed to mount the package, Action: Run the "cluster image
package show-repository" command to check if the package version is
correct and available.
validation mount-image 8 cluster1-05 3/26/2025 completed
13:05:01
validation mount-image 9 cluster1-06 3/26/2025 failed
13:05:01
Details: Error: Failed to mount the package, Action: Run the "cluster image
package show-repository" command to check if the package version is
correct and available.
validation complete- 10 MUM 3/26/2025 completed
validation 13:05:01
::*>
- クラスタが正常な状態でアラートはありません:
::> cluster show
::> system health alert show