メインコンテンツまでスキップ

複数のエラーが記録された後、ドライブで障害が発生しないのはなぜですか。

Views:
33
Visibility:
Public
Votes:
0
Category:
disk-drives
Specialty:
esg
Last Updated:

に適用されます

NetApp E シリーズと EF シリーズ

回答

ドライブは、さまざまな理由で障害状態にすることができます。

  • 書き込み要求が失敗した場合、ドライブは常に障害状態になります。
  • その他の障害の原因は、 NVSRAM の Drive Exception Management 領域でドライブタイプごとに指定されているドライブエラーしきい値によって決まります。
  • プライマリドライブとセカンダリドライブの設定は、さまざまなソリューションに対応するために、 NVSRAM のバージョンによって異なります。
  • NVSRAM で指定されたエラーしきい値をドライブが超えると、ドライブは障害状態になります。

プライマリドライブタイプは次のとおりです。

  • Fibre Channel ( FC ;ファイバチャネル)ドライブ
  • Serial Attached SCSI ( SAS )ドライブ。
  • Non-Volatile Memory Express ( NVMe )ドライブが含まれます。

セカンダリドライブタイプは次のとおりです。

  • Serial Advanced Technology Attachment ( SATA )ドライブ。
  • ニアライン SAS ( NL SAS )ドライブ。

ドライブエラーしきい値はで構成されています

  • 指定した数のイベント
  • イベントのタイプ
  • 時間のウィンドウ

NVSRAM のドライブエラーしきい値の設定は手動で変更できますが、変更することは強く推奨されません。NVSRAM の現在の設定が目的の仕様に対応していない場合は、別のバージョンの NVSRAM をロードすることを推奨します。これには、目的の設定がプリロードされています

注: 各コントローラには個別の PFA カウンタがあります。これは、過剰なトラフィックを防ぐための設計です。単一のコントローラでしきい値を超えていないと、ドライブは障害状態になりません。

例:障害しきい値 = 1 時間のハードウェアエラー数 2 。

ドライブは、ハードウェアエラーを 2 件 30 分でログに記録します。サーフェス上では、これはしきい値制限を明確に超えているように見えます。ただし、それぞれのエラーが別のコントローラ( 1 × A 、 1 × B )によってログに記録されている場合、 PFA しきい値を超過していないため、ドライブは障害状態になりません。

 

追加情報

AdditionalInformation_Text

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.