メインコンテンツまでスキップ

E シリーズの管理ポートを設定する場合のデフォルトの IP 動作はどれか?

Views:
60
Visibility:
Public
Votes:
0
Category:
e-series-systems
Specialty:
esg
Last Updated:

すべてのとおり  

に適用されます

すべての E シリーズプラットフォーム

回答

E シリーズのデフォルトの管理ポート IP の動作:

  • E シリーズコントローラでは、出荷時に DHCP が有効になっています。コントローラの特定のネットワークポートで DHCP アドレスを取得できない場合は、デフォルトの静的 IP アドレスに戻ります。この処理には 3 分程度かかる場合があります。
  • デフォルトの静的 IP アドレスは、コントローラのネットワークポートが DHCP を使用するように設定されている場合、リンクダウンイベントが発生すると失われます。
    • ポートが DHCP 用に設定されている場合、ケーブルの差し込み、リブート、電源の再投入など、リンクアップイベントのたびにコントローラが DHCP アドレスの取得を試みます。 
    • DHCP の試行が失敗すると、そのポートのデフォルトの静的 IP アドレスが使用されます。 
  • DHCP を使用する場合は、永続的な DHCP リースを使用することを推奨します。
  • 静的 IP アドレスを使用する場合は、 SANtricity を使用して静的 IP を設定することを推奨します。静的 IP を設定すると、リンク停止 / 稼働イベントが発生してもその IP は維持されます。
  • 注:
    • 管理 IP アドレスを変更すると、 SANtricity 管理ソフトウェアからストレージアレイに接続できなくなることがあります。
    • Enterprise Management (エンタープライズ管理)ウィンドウからストレージアレイを削除して、再度追加します。

11.60 以前を実行している EF600 を除くすべてのプラットフォームのデフォルトの IP アドレス:

  • IP アドレス 
    • Controller 1 (port 1):  IP Address : 192.168.128.101
    • Controller 1 (port 2):  IP Address : 192.168.129.101*
    • Controller 2 (port 1):  IP Address : 192.168.128.102
    • Controller 2 (port 2):  IP Address : 192.168.129.102*
  •  サブネット マスク:255.255.255.0

11.60.2 以降を実行するすべてのプラットフォーム、または 11.60 以降を実行する EF600 のすべてのプラットフォームのデフォルトの IP アドレス:

  • IP アドレス
    • Controller 1 (port 1):  IP Address : 169.254.128.101
    • Controller 1 (port 2):  IP Address : 169.254.129.101*
    • Controller 2 (port 1):  IP Address : 169.254.128.102
    • Controller 2 (port 2):  IP Address : 169.254.129.102*
  • サブネット マスク:255.255.0.0

* コントローラのポート 2 はカスタマーサポート用に予約されている必要があります。 DHCP が有効なデフォルトのネットワーク設定は変更しないでください。

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.