メインコンテンツまでスキップ

クラスタスイッチのポートエラーが原因のクラスタポートのCRCエラーです

Views:
10
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
network
Last Updated:

環境

  • ONTAP 9
  • Ciscoクラスタインターコネクトスイッチ

問題

  • EMS-LOG-FILE AutoSupport のセクションでは、スイッチに接続されたノードのポートからCRCエラーが報告されます
Thu Nov 04 02:30:48 +0100 [Node1: vifmgr: vifmgr.cluscheck.crcerrors:alert]: Port e0a on node Node1 is reporting a high number of observed hardware errors, possibly CRC errors
  • IFSTAT 出力:-
    -- interface e2a (54 days, 7 hours, 16 minutes, 50 seconds) -- connected to bond-sw-02(FDO26020KJB) port Ethernet1/10 RECEIVE Total frames: 7264m | Frames/second: 1548 | Total bytes: 20720g Bytes/second: 4416k | Total errors: 1437 | Errors/minute: 0 Total discards: 0 | Discards/minute: 0 | Multi/broadcast: 9402k Non-primary u/c: 0 | CRC errors: 1427 | Runt frames: 0 Fragment: 0 | Long frames: 0 | Jabber: 2 Length errors: 0 | No buffer: 0 | Xon: 0 Xoff: 0 | Pause: 0 | Jumbo: 2327m Noproto: 0 | Error symbol: 0 | Illegal symbol: 8 Bus overruns: 0 | Queue drops: 0 | LRO segments: 5374m LRO bytes: 20524g | LRO6 segments: 0 | LRO6 bytes: 0 Bad UDP cksum: 0 | Bad UDP6 cksum: 0 | Bad TCP cksum: 0 Bad TCP6 cksum: 0 | Mcast v6 solicit: 0 | Lagg errors: 0 Lacp errors: 0 | Lacp PDU errors: 0 Node-15 -- interface e1a (54 days, 5 hours, 2 minutes, 29 seconds) -- connected to bond-sw-02(FDO26020KJB) port Ethernet1/1/1 RECEIVE Total frames: 4798m | Frames/second: 1025 | Total bytes: 26784g Bytes/second: 5718k | Total errors: 31463 | Errors/minute: 0 Total discards: 0 | Discards/minute: 0 | Multi/broadcast: 9009k Non-primary u/c: 0 | CRC errors: 31213 | Runt frames: 0 Fragment: 0 | Long frames: 250 | Jabber: 0 Length errors: 0 | No buffer: 0 | Xon: 0 Xoff: 0 | Pause: 0 | Jumbo: 3213m Noproto: 0 | Error symbol: 0 | Illegal symbol: 0 Bus overruns: 0 | Queue drops: 0 | LRO segments: 2383m LRO bytes: 26564g | LRO6 segments: 0 | LRO6 bytes: 0 Bad UDP cksum: 0 | Bad UDP6 cksum: 0 | Bad TCP cksum: 0 Bad TCP6 cksum: 0 | Mcast v6 solicit: 0 | Lagg errors: 0 Lacp errors: 0 | Lacp PDU
  • スイッチ側からは、次の出力から高い数の入出力エラーが検出 show tech-supportされました。
Ethernet1/4/1 is up admin state is up, Dedicated Interface Hardware: 10000 Ethernet, address: cc90.70ee.774c (bia cc90.70ee.774c) MTU 1500 bytes, BW 10000000 Kbit , DLY 10 usec RX 3908787286 unicast packets 103884 multicast packets 75257 broadcast packets 3909318114 input packets 3409382136056 bytes 351690 jumbo packets 0 storm suppression bytes 0 runts 351686 giants 1 CRC 0 no buffer 351687 input error 0 short frame 0 overrun 0 underrun 0 ignored 0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop 0 input with dribble 0 input discard 0 Rx pause TX 9604947077 unicast packets 1454349 multicast packets 3536215 broadcast packets 9610809120 output packets 10785052005849 bytes 872003 jumbo packets 871479 output error 0 collision 0 deferred 0 late collision 0 lost carrier 0 no carrier 0 babble 10093176 output discard 0 Tx pause Ethernet1/4/2 is up admin state is up, Dedicated Interface Hardware: 10000 Ethernet, address: cc90.70ee.774d (bia cc90.70ee.774d) MTU 1500 bytes, BW 10000000 Kbit , DLY 10 usec RX 3521803990 unicast packets 103884 multicast packets 75154 broadcast packets 3522485765 input packets 2984871566565 bytes 510507 jumbo packets 0 storm suppression bytes 0 runts 502737 giants 0 CRC 0 no buffer 502737 input error 0 short frame 0 overrun 0 underrun 0 ignored 0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop 0 input with dribble 0 input discard 0 Rx pause TX 8123951053 unicast packets 1454350 multicast packets 3536320 broadcast packets 8130520023 output packets 8924134848266 bytes 1579516 jumbo packets 1578300 output error 0 collision 0 deferred 0 late collision 0 lost carrier 0 no carrier 0 babble 4487495 output discard 0 Tx pause

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.