メインコンテンツまでスキップ

ATTO FB6500N に到達できません

Views:
13
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

環境

  • Data ONTAP 7-Mode
  • ファブリック接続MetroCluster
  • ATTO FB6500N

問題

システムが Multi-Path HA から Mixed-Path HA またはシングルパス HA に移行します。
例:
 
NodeA> sysconfig -a

NetApp Release 8.2.4P5 7-Mode: Tue Aug 23 18:11:38 PDT 2016
     System ID: XXXXXXXXXX (NodeA); partner ID: XXXXXXXXXX (NodeB)
     System Serial Number: XXXXXXXXXXXX (NodeA)
     System Rev: C1
     System Storage Configuration: Mixed-Path HA

 
sysconfig -a の出力に ATTO が含まれていません。
例:
 
NodeA> sysconfig -a
 
   slot 5: FC Host Adapter 5a (QLogic 2532 rev. 2, N-port, <UP>)
      ...
         FC_Switch_A1:3.126L1      : NETAPP   X422_SLTNG600A10 NA02 560.0GB 520B/sect (XXXXXXX)
         FC_Switch_A1:3.126L2      : NETAPP   X422_SLTNG600A10 NA02 560.0GB 520B/sect (XXXXXXX)
         FC_Switch_A1:3.126L3      : NETAPP   X422_SLTNG600A10 NA02 560.0GB 520B/sect (XXXXXXX)
         FC_Switch_A1:3.126L4      : NETAPP   X422_SLTNG600A10 NA02 560.0GB 520B/sect (XXXXXXX)
         FC_Switch_A1:3.126L5      : NETAPP   X422_SLTNG600A10 NA02 560.0GB 520B/sect (XXXXXXX)
         FC_Switch_A1:3.126L6      : NETAPP   X422_SLTNG600A10 NA02 560.0GB 520B/sect (XXXXXXX)
         FC_Switch_A1:3.126L7      : NETAPP   X422_SLTNG600A10 NA02 560.0GB 520B/sect (XXXXXXX)
         FC_Switch_A1:3.126L8      : NETAPP   X422_SLTNG600A10 NA02 560.0GB 520B/sect (XXXXXXX)
         FC_Switch_A1:3.126L9      : NETAPP   X422_SLTNG600A10 NA02 560.0GB 520B/sect (XXXXXXX)
         FC_Switch_A1:3.126L10     : NETAPP   X422_SLTNG600A10 NA02 560.0GB 520B/sect (XXXXXXX)
         FC-to-SAS Bridge:
         FC_Switch_A1:1.126L0      : ATTO    FibreBridge6500N 1.62  FB6500N000001
         FC_Switch_A1:3.126L0      : ATTO    FibreBridge6500N 1.62  FB6500N000002
            FC_Switch_A1:2.126L0      : ATTO    FibreBridge6500N 1.62  FB6500N000003
            FC_Switch_A1:4.126L0      : ATTO    FibreBridge6500N 1.62  FB6500N000004 <-- Missing
            FC_Switch_A1:2.shelf1: DS2246  Firmware rev. IOM6 A: 0191  IOM6 B: 0191
            FC_Switch_A1:2.shelf2: DS2246  Firmware rev. IOM6 A: 0191  IOM6 B: 0191
 
スイッチ / ATTO のエラーです。
例:
 
ATTO
get fcporterrors all 5 ; Fibre Channel Error Counts ; Port | Link Failures | Sync Loss | Signal Loss | Invalid Tx | Invalid CRC ;========================================================================== 1 14 2 1 765 0 2 1 1 1 0 0
 
FCスイッチ
porterrshow : frames enc crc crc too too bad enc disc link loss loss frjt fbsy c3timeout pcs tx rx in err g_eof shrt long eof out c3 fail sync sig tx rx err ... 4: 165.5m 972.6m 0 0 0 0 0 0 120.1k 0 1 0 1 0 0 0 0 0 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.