メインコンテンツまでスキップ

インバンドで監視されているATTOブリッジ到達不能アラート

Views:
3
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster<a>2009173340</a>
Last Updated:

環境

  • ファブリックMetroCluster
  • インバンドで監視されるATTO 7600N FibreBridge
  • インバンドで監視されるATTO 7500N FibreBridge

問題

  • ヘルスモニタアラート は イベントログに表示されます。

[Node-01: schmd: hm.alert.raised:alert]: Alert Id = StorageBridgeUnreachable_Alert , Alerting Resource = 20000010XXXXXX0 raised by monitor system-connect
[Node-01: mgwd: callhome.hm.alert.major:alert]: Call home for Health Monitor process schm: StorageBridgeUnreachable_Alert[20000010XXXXXX0].

  • device is not monitored via the management network インバンド監視にもかかわらず、システムヘルスアラートが表示される:

Cluster-02::> system health alert show

      Node: Node-01
      Resource: ATTO_20000010XXXXXX0
      Severity: Major
   Indication Time: Mon May 16 00:40:52 2022
      Suppress: false
     Acknowledge: false
   Probable Cause: "ATTO_20000010XXXXXX0"bridge is not reachable over management network.
   Possible Effect: Bridge "ATTO_20000010XXXXXX0" cannot be monitored for alerts.
Corrective Actions: 1) If the bridge is monitored by SNMP, verify that the node management LIF is up by using the              "network interface show" command. Verify that the "ATTO_20000010XXXXXX0" bridge is alive by using             the "network ping" command.
           2) If the bridge is monitored in-band, check the fabric cabling to the bridge, and then verify that            the bridge is powered up.

  • ブリッジモニタのステータスが「error」と表示される:

Cluster-02::> storage bridge show
                    Is     Monitor Managed                         Is Bridge
Bridge           Symbolic Name Monitored Status  By    Vendor Model          Bridge WWN     Secure
------------------------ ------------- --------- ------- ------- ------ --------------------- ---------------- --------
ATTO_20000010XXXXXX0   BRIDGE1     true    error  -     Atto   FibreBridge 7600N    20000010xxxxxxxx false

  • ATTOブリッジには一方のクラスタからアクセスできますが、もう一方のクラスタからはアクセスできません。

Cluster-01::> storage bridge run-cli -name ATTO_20000010XXXXXX0 -command "info"
[Job 17079] Job is queued: Executing ATTO CLI command "info" on bridge "ATTO_20000010XXXXXX0"..
Device Status      = Good
Unsaved Changes     = None
Device         = "FibreBridge 7600N"
.....

Ready.

[Job 17079] Job succeeded.

Cluster-02::> storage bridge run-cli -name ATTO_20000010XXXXXX0 -command "info"
[Job 18764] Job succeeded: Bridge is currently unavailable. Wait a few minutes and then try the operation again.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device