クラスタからATTOブリッジのIPアドレスの変更が失敗します

最後の更新
PDFとして保存

Views:: 1

Visibility:: Public

Votes:: 0

Category:: metrocluster

Specialty:: metrocluster<a>2009500006</a>

Last Updated:

環境

ONTAP 9
FAS / AFFシステム
ファブリック接続MetroCluster
インバンド監視中のATTOブリッジ

問題

IPアドレスの変更後にATTOブリッジでエラーステータスが報告されます。

Cluster1::> storage bridge show -fields name,status name status --------------------- ------ ATTO_2000XXXXXXXXXX40 error ATTO_2000XXXXXXXXXX80 error ATTO_2000XXXXXXXXXX90 error ATTO_2000XXXXXXXXXXc0 error 4 entries were displayed.

ノードからブリッジ到達不能アラートが報告されます。

Cluster1::> system health alert show Node: Node-n3 Alert ID: StorageBridgeUnreachable_Alert Resource: ATTO_200000108XXXXX40 Severity: Major Indication Time: Wed Mar 15 19:21:32 2023 Suppress: false Acknowledge: false Probable Cause: "ATTO_200000XXXXXXXX40" bridge is not reachable over management network. Possible Effect: Bridge "ATTO_200000XXXXXXXX40" cannot be monitored for alerts. Corrective Actions: 1) If the bridge is monitored by SNMP, verify that the node management LIF is up by using the "network interface show" command. Verify that the "ATTO_200000XXXXXXXX40" bridge is alive by using the "network ping" command. 2) If the bridge is monitored in-band, check the fabric cabling to the bridge, and then verify that the bridge is powered up.

次の場合、ブリッジ監視の変更が失敗します。

1.新しいIPアドレスを追加しようとしています。

Cluster1::> system bridge add -name ATTO_172.20.YY.YY -address 172.20.YY.YY -managed-by in-band

Error: command failed: Internal error. Failed to add bridge for monitoring on node "Node-n3" in cluster "Cluster1". Reason: Bridge ATTO_172.20.YY.YY not found in array_profile_db.

2.既存のIPアドレスを変更しようとしています。

Cluster1::> storage bridge modify -name ATTO_200000XXXXXXXXc0 -address 172.20.YY.YY

Error: command failed: Bridge is not reachable over SNMP on node "Node-n3" in cluster "Cluster1". Verify that the node management LIF is up by using the "network interface show -role node_mgmt" command on a node in cluster "Cluster1". Verify that SNMP is enabled on the bridge using a method supplied by the bridge's vendor (ATTO). Then try the command again.

3. ヘルスモニタリングからブリッジを削除および再追加します。

Cluster1::> storage bridge remove -name ATTO_200000XXXXXXXXc0

Cluster1::> storage bridge add -name ATTO_200000XXXXXXXXc0 -address 172.20.YY.YY -managed-by in-band

Cluster1::> storage bridge show -name ATTO_200000XXXXXXXXc0 -fields address name address --------------------- ------------ ATTO_200000XXXXXXXXc0 172.19.XX.XX