メインコンテンツまでスキップ

一方のドライブのパスがこの IOM でバイパスされています

Views:
20
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

環境

  • 「システムは、シングルパス、マルチパス、クアッドパス接続ストレージの混在環境に移行しました」と報告されています
  • 「disk redundancy failed」と表示される

問題

  • 1つのパスでディスクが見つかりません

cluster::> storage show disk -fields initiator
disk initiator
------- -----------------------
1.30.19 3c,3d,3a,3b,3a,3c,3d,3b
1.30.20 3c,3d,3a,3b,3a,3c,3d,3b
1.30.21 3c,3d,3a,3b,3a,3c,3d,3b
1.30.22 3d,3a,3a,3d
1.30.23 3c,3d,3a,3b,3a,3c,3d,3b

  • ディスクのSASパス数が想定される数を下回っている(以下に示すHAペアはマルチパスHA用にケーブル接続されています)。
cluster::*> storage disk show -fields model,path-count -path-count !4 
disk model path-count -------- ---------------- ---------- 1.30.22 X357_S16433T8ATE 2 

1 外付けディスクシェルフを使用するシングルノード(HA以外)システム、内蔵型ディスクを使用するシステム(AFF A200やFAS2700など)、またはシングルパスのみにケーブル接続されているシステムの場合は、パス数を!2に変更します。同様に、クアッドパスのケーブル接続システム(IOM12のみ)でも、パス数を「!8」に変更します。

  • ディスクのパスが見つからない(ノードシェル):
cluster::> node run -node * storage show disk -p 2 entries were acted on.
Node: cluster-n01 PRIMARY PORT SECONDARY PORT SHELF BAY -------- ---- --------- ---- --------- ... 0b.30.21 A 1c.30.21 B 30 21 0b.30.22 A 30 22 0b.30.23 A 1c.30.23 B 30 23 ...
  • イベントログに無効なDWORDエラーが大量に報告されました

ds.sas.drivephy.disableErr:error]: Disk  [NETAPP :X477_HAKPE04TA0:NA0] S/N [XXXX] on channels 0b shelf ID 30 IOM B bay 22 Disabled due to excessive invalid dword error.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.