メインコンテンツまでスキップ

DIAG「SATAドライブストレステスト」後、コントローラーを起動できません

Views:
15
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

環境

  • FAS8300
  • FAS8700
  • 400
  • ONTAP 9.7p4

問題

  •  Stress-Test System診断を実行すると、ノードはブート不可の状態になります。

例:

1) Scan System
2) Test System (must scan system, first)
3) Test Memory (must scan system, first)
4) Stress-Test System (must scan system, first)
5) Show VPD Information
6) Show FW Revision
7) Show MAC Address
8) Show Logs
9) Reboot (BMC Power Cycle) Controller to LOADER

[2020-09-30 14:49:12.884] Can't find backup boot device u0a.1
[2020-09-30 14:49:12.941] ACPI RSDP Found at 0x6c505000
[2020-09-30 14:49:15.574] Auto FW update image invalid: Unsupported function
[2020-09-30 14:49:15.583] Auto FW update failed fat://boot0/X86_64/firmware/SB_XXVII/firmware2.img
[2020-09-30 14:49:15.594] Warning: Auto-update firmware image is invalid. Contact technical support for assistance.

  • ブート中にノードをメンテナンスモードにできません。
例:

*******************************
* *
* Press Ctrl-C for Boot Menu. *
* *
*******************************
cryptomod_fips: Executing Crypto FIPS Self Tests.
cryptomod_fips: Crypto FIPS self-test: 'CPU COMPATIBILITY' passed.
yptomod_fips: Crypto FIPS self-test: 'Self-integrity' passed.
^CBoot Menu will be available.
WARNING: Failed to restore /var from /dev/nvrd1. Removing logs...
ERROR: netapp_varfs: Failed to restore /var from /dev/nvrd1 after clean shutdown. Please contact technical support.

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.