メインコンテンツまでスキップ

EMSが「Partner SP firmware does not support the hw_assist feature」というエラーを報告する

Views:
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw<a>2009846586</a>
Last Updated:

環境

  • AFF-A700
  • ONTAP 9.12.1P7
  • サービスプロセッサ(SP) 4.11

問題

  • EMSから次のエラーが報告されます。

例:

Thu Nov 09 20:24:17 [node09: cf_hwassist: cf.hwassist.IpNotConfigured:error]: cf hw_assist: Partner(node10)'s SP is not configured with the right IP address family. Use the "storage failover hwassist show" command for details.
Fri Nov 10 04:36:17 [node09: cf_hwassist: cf.hwassist.FwUpgrade:error]: HA hw_assist: Partner(node10) SP firmware does not support the hw_assist feature.
Fri Nov 10 12:48:17 [node09: cf_hwassist: cf.hwassist.FwUpgrade:error]: HA hw_assist: Partner(node10) SP firmware does not support the hw_assist feature.
  • Storage failover show 出力:
::*> storage failover show -fields hwassist-status
node   hwassist-status
------ ---------------
node01 active
node02 active
node03 active
node04 active
node05 active
node06 active
node07 active
node08 active
node09 inactive:SP on node10 is not capable of sending alerts over IPv4 address.
node10 active

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.