メインコンテンツまでスキップ

クラスタスイッチの削除後に 'SwitchCommunityString_Alert で SNMP エラーが発生しました

Views:
18
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core<a>2009086847</a>
Last Updated:

環境

  • ONTAP 9
  • クラスタ ネットワーク スイッチ

問題

  • クラスタスイッチを削除してスイッチレスクラスタに変換すると、スイッチ構成エラーに関するアラートが表示されます。
  • このエラーは、クラスタスイッチのIP設定の交換、アップグレード、または変更後にも表示されることがあります
::>system health alert show
    Node: cluster1n1
    Resource: cluster1-sw01
    Severity: Major
    Indication Time: Mon Mar 14 15:25:48 2022
    Suppress: false
    Acknowledge: false
    Probable Cause: Ethernet switch "cluster1-sw01" with IP address "192.168.1.5" is not reachable via SNMP.Incorrect SNMP community string might be configured on the Ethernet switch. Possible Effect: Ethernet switch communication problems and accessibility issues.
    Corrective Actions: Check the SNMP community string on Ethernet switch to verify that the expected community string is configured. Use the "system switch ethernet show -snmp-config" command to view the expected community string

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.