メインコンテンツまでスキップ

「スイッチバック中にディスクがリストアされなかった」ことが原因でスイッチバックが失敗した

Views:
4
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

環境

  • AFF-A800
  • 内蔵シェルフ

問題

  • スイッチバックを実行するときに、以下のような再利用テストが実行されます。
Cluster_A (manual recovery required): Some disks were left behind during switchback. They are listed along with a reason for failure: 2.11.15 (no error)
If any of these disks are failed, replace them. Otherwise use the "metrocluster switchback" command again to return the disks to their original owner. Use the "storage disk show -dr-home-id !- -fields dr-home, container-type, aggregate" command for more details on the status of the left-behind disks.
 
  • 内部ディスクにパートナーノードの Node_a_2 のパスがありません
  • 次のコマンドを実行しても見つからないパスは報告されません。
 
Cluster_A::> storage disk show -disk 2.11.15
                  Disk: 2.11.15
        Container Type: shared
            Owner/Home: node_A_1 / node_A_1
   
Paths:
                                LUN  Initiator Side      
Controller         Initiator     ID  Switch Port         
------------------ ---------  -----  --------------------
node_A_1           0n            17  N/A                 
---------

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.