メインコンテンツまでスキップ

ONTAPのリブート後にLACP ifgrpポートの参加が「partial」に変わる

Views:
516
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
nas<a>ONTAP 9.3</a><a>LACP</a><a>1085793</a><a>ifgrp</a>
Last Updated:

環境

  • ONTAP 9.3
  • ONTAP 9.5
  • ONTAP 9.6
  • リンクアグリゲーショングループ(LAG)
  • Link Aggregation Control Protocol(LACP)

問題

  • ONTAPのリブート後、LACP ifgrpがポートの1つに部分的に参加していると表示されます。
    •  :ONTAPのリブートには、パニック/計画的テイクオーバー/ ONTAPのアップグレードなどの理由が考えられます。

::*> ifgrp show -node node01 -ifgrp a0a
                 Node: node01
Interface Group Name: a0a
Distribution Function: ip
        Create Policy: multimode_lacp
          MAC Address: 92:xx:xx:xx:xx:xx
   Port Participation: partial
        Network Ports: e0c, e0d
             Up Ports: e0c
           Down Ports: e0d

  • この問題は、スタティックマルチモードifgrpに変更した場合には表示されません。

マルチモードポートの場合は、次の手順を実行します。    
::*> ifgrp show -node node01 -ifgrp a0a
                 Node: node01
Interface Group Name: a0a
Distribution Function: ip
        Create Policy: multimode
          MAC Address: 92:xx:xx:xx:xx:xx
   Port Participation: full
        Network Ports: e0c, e0d
             Up Ports: e0c, e0d
           Down Ports: -  

  • この問題は、CNAカード8324でのみ表示されます。   

slot 0: 1G/10G Ethernet Controller CNA EP 8324
(Dual-port, QLogic CNA 8324(8362) rev. 2)
e0c MAC Address:    92:e2:ba:b9:da:9c (auto-10g_sr-fd-up)
e0d MAC Address:    92:e2:ba:b9:da:9c (auto-10g_sr-fd-up)
Device Type:        EP8324N
Firmware Version:   5.4.66.0    

  • スイッチ側の構成に変更はなく、ポートは物理的に稼働しています。

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.