メインコンテンツまでスキップ

ネットワークポートのCRCエラーが原因でNASアクセスが低速またはハングした

Views:
43
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
perf
Last Updated:

環境

  • ONTAP 9
  • NFS

問題

  • アプリケーションを実行するたびにデータ転送速度が低下し、読み取りレイテンシが高くなることが観察される
  • qos statistics volume latencyコマンドによるレイテンシの低減
  • NFSクライアントレポートのエラーとハング:

kernel: nfs: server 10.xx.xx.xx not responding, still trying 

  • (クライアントまたはストレージからの)パケットトレースで、再送信パケットと順不同のパケットが表示されることがある
  • ネットワークエラーの確認
    • Filerからポートを確認するには、次のコマンドを使用します。
      • >>: node run -node node1 -command "ifstat-a" 影響を受けるポートの場合
    • ネットワークチームの協力を得て、接続されているスイッチポートも確認する
  •  cluster::> system node run -node "nodename" -command ifstat -a -- interface e4a (2 days, 10 hours, 22 minutes, 35 seconds) -- RECEIVE Total frames: 5161m | Frames/second: 24558 | Total bytes: 5152g Bytes/second: 24516k | Total errors: 35927 | Errors/minute: 10 Total discards: 0 | Discards/minute: 0 | Multi/broadcast: 26826k Non-primary u/c: 0 | CRC errors: 35927 | Runt frames: 0 Fragment: 0 | Long frames: 0 | Jabber: 0 Length errors: 0 | No buffer: 0 | Xon: 0 Xoff: 0 | Pause: 0 | Jumbo: 218k Noproto: 0 | Error symbol: 0 | Illegal symbol: 0 Bus overruns: 0 | Queue drops: 0 | LRO segments: 2060m LRO bytes: 4909g | LRO6 segments: 0 | LRO6 bytes: 0 Bad UDP cksum: 0 | Bad UDP6 cksum: 0 | Bad TCP cksum: 0 Bad TCP6 cksum: 0 | Mcast v6 solicit: 0 | Lagg errors: 0 Lacp errors: 0 | Lacp PDU errors: 0
  • CRCエラーは受信側のデータ問題を示します。
  • CRCを使用すると、再送信および受信されたパケットの順序が乱れてパケット損失が発生します。

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.