メインコンテンツまでスキップ

ONTAP は bootmgr エラーで初期化できません

Views:
47
Visibility:
Public
Votes:
1
Category:
ontap-9
Specialty:
hw<a>FSE</a><a>パーシャルシェルフ</a>
Last Updated:

環境

ONTAP 9

問題

新しいONTAP HAペアの初期化または既存のHAペアの転用を試みると、次のようなエラーが発生します。

AutoPartAFFDetermination: total_disks: 12 num_internal_disks: 0 num_ssds: 12 num_unknowns: 0 num_mediator_disks: 0 num_not_supported: 0 all_ssd? true
AutoPartDiskScan: CandidateDisks: 12 UsableDisks: 12 LocalDisks: 0 UnusableSSDs: 0 PartitionMethod: Root+Data1+Data2
AutoPartDistributionCheck: LocalExpected: 6 PartnerExpected: 6 CandidateDisks: 12 LocalAssigned: 0 NotYetAssigned: 12
AutoPartRootConfig: root d+p+s=3+2+1, root aggr size=112958795 (blks) per 3 disks, root partition size=37660227 (blks)
AutoPartRequestedDiskAssignment: DiskMaxCount: 12 CksumType: block Pool: 0 RPM: 50000 DiskType: SSD
AutoPartInfo: Disks may be from internal or external shelf

AdpInit: Root will be created with 6 disks with configuration as (3d+2p+1s) using disks of type (SSD).
bootarg.bootmenu.selection is |4|
AdpInit: System will now perform initialization using option 4

BOOTMGR: The system has 0 disks assigned whereas it needs 6 to boot, will try to assign the required number.
sanown_assign_X_disks: init boot assign with half shelf policy
Jun 01 11:27:07 [localhost:diskown.hlfShlf.assignStatus:notice]: Half shelf based automatic disk assignment is "enabled".
sanown_split_shelf_resv_lock_disk: msg success op: RESERVE lock disk:  status: 0
BOOTMGR: If the disk shelves are partially populated,
Follow best practice guidelines to populate disks in the right slots

sanown_split_shelf_resv_lock_disk: msg success op: RELEASE lock disk:  status: 0
BOOTMGR: already_assigned=0, min_to_boot=6, num_assigned=0
BOOTMGR: Assigned 0 out of 6 disks requested
fm_run0: no local disks found & OFW channel is not up.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
  • この記事は役に立ちましたか?