メインコンテンツまでスキップ

長時間パートナーをテイクオーバーしたノードのリブート後に SAN サービスが停止する

Views:
22
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
san
Last Updated:

環境

  • ONTAP 9.0
  • ONTAP 9.1 から ONTAP 9.1P3 へのアップグレード
  • 2 ノードの SAN クラスタ:一方のノードがテイクオーバー状態で、稼働している HA パートナーノードがリブートします

問題

  • ONTAP 9.0 または 9.1 を実行しているクラスタで、テイクオーバー状態のノードが 1 つある状態のまま長時間にわたっている
  • 稼働しているノードでリブートすると、 SAN 論理インターフェイス( LIF )が稼働できなくなります

::> net int show
  (network interface show)
       Logical   Status    Network       Current     Current Is
Vserver    Interface  Admin/Oper Address/Mask     Node      Port   Home
----------- ---------- ---------- ------------------ ------------- ------- ----
svm_win
       LIF_1-1   up/-   20:01:00:a0:98:bb:xx:xx   cluster1-01   0e    true
       LIF_1-2   up/-   20:02:00:a0:98:bb:xx:xx   cluster1-01   0f    true

  • 既存の LIF を変更したり新しい LIF を作成したりすることはできません

::> net int create -vserver <vserver> -lif test -data-protocol fcp -role data -home-node  cluster1-01 -home-port 0e
  (network interface create)

Error: command failed: No nodes are available to process the command. Verify that all nodes are healthy using the "cluster show" command, then try the command again.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.