メインコンテンツまでスキップ

SP ファームウェア 5.1 へのアップグレード後も、 SP はバックアップファームウェアイメージからの起動を続行します

Views:
46
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

環境

  • Data ONTAP 9.x
  • AFF-A200、AFF-A300、FAS2650、FAS8200

問題

SPファームウェア5.1へのアップグレード後も、SPはバックアップファームウェアイメージでブートを続行します。

新しいファームウェアバージョンがプライマリイメージに対してインストール済みと表示されていても、SPはバックアップイメージのブートを続行します。
version
=======
Booted backup firmware version 5.0.1
Primary firmware version 5.1
Backup firmware version 5.0.1

Service Processor           Status: Online
 Firmware Version:   5.0.1
 Mgmt MAC Address:   00:A0:98:A9:C2:9D
 Ethernet Link:      up, full duplex, auto-neg complete
 Using DHCP:         no

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.