メインコンテンツまでスキップ

シェルフとセンサーでアップグレードの検証チェックが実行されません

Views:
28
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

環境

ONTAP 9

問題

ONTAP のアップグレードの検証中に次のエラーメッセージが表示されます。

::> cluster image show-update-progress
 
                       Estimated      Elapsed
Update Phase      Status           Duration     Duration
-------------------- ----------------- --------------- ---------------
Pre-update checks   failed           00:10:00     00:04:21
 
Details:
 
Pre-update Check    Status       Error-Action
-------------------- ----------------- --------------------------------------     
Shelves and Sensors  Error        Error: Validation check failed to
check                  execute properly.
                    Action: If the problem persists after
                    retrying, delete the package and
                    download again

また、 'system node environment sensors show''system node power show' などのコマンドや戻りタイムアウトエラーもあります。

::> system node environment sensors show
   
Node Sensor          State Value/Units Crit-Low Warn-Low Warn-Hi Crit-Hi    
---- --------------------- ------ ----------- -------- -------- ------- -------
node-1a
   PSU2 FRU        normal     GOOD
   PSU1 FRU        normal     GOOD
   SP Status        normal IPMI_HB_OK
   mSATA Status      normal      OK
   mSATA Pres       normal   PRESENT
 
Warning: Unable to list entries on node node-1a. The Service
     Processor on node "node-1a" is not reachable. Verify that
     the SP or BMC is online, verify that api-service is enabled on the SP
     or BMC, verify that the partner node is running, check if pings from
     SP or BMC to partner node work, check if hw-assist keep-alives are
     normal, check that network ports are configured correctly and are
     functional (up). Then, try the command again.
 
node-1b
   PSU2 FRU        normal    GOOD
 
Warning: Unable to list entries on node node-1b. Timeout: Operation
     "environment_sensors_iterator::next_imp()" took longer than 50
     seconds to complete [from mgwd on node "node-1a" (VSID: -1)
     to mgwd at 192.168.205.7]
 
Error: show failed: Timeout: Operation
    "environment_sensors_iterator::next_imp()" took longer than 50 seconds
    to complete [from mgwd on node "node-1a" (VSID: -1) to mgwd at
    192.168.205.7]
6 entries were displayed.

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support