メインコンテンツまでスキップ

Emulex FC HBA ポートは SRAM ダンプでリセットされます

Views:
3
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
san<a>SAN</a><a>2008990050</a>
Last Updated:

環境

  • ONTAP 9
  • Fibre Channel
  • Emulex HBA

問題

  • 散発的、断続的なパス損失や遅延の増大
  • EMS ログエントリ( A ):
fct_tpd_thread_6: scsitarget.hwpfct.errorReset:notice]: An error was encountered in the FC target driver on Fibre Channel target adapter 10c. The adapter will be automatically reset to clear the status:0x87800000, status1:0x52004c62, status2:0x610102, DIP:1, RN:1, RDY:1, Dump owner:6 condition.
 
fct_tpd_thread_2: scsitarget.hwpfct.errorReset:notice]: An error was encountered in the FC target driver on Fibre Channel target adapter 2c. The adapter will be automatically reset to clear the status:0x87800000, status1:0x52004c62, status2:0x610102, DIP:1, RN:1, RDY:1, Dump owner:2 condition.
  • EMS ログエントリ( b ):

fct_tpd_thread_7: scsitarget.fcp.dump:debug]: FCP target SRAM dump generated for adapter 10d, fct_tpd_check_hung_commands: Command termination hung. cmd:0xfffff817f82e3288 (state=0xa, flags=0x2,ctio_sent=1/2, RecvExAddr=0x19a5, OX_ID=0x43fc, RX_ID=0xffff, SID=0x153476)

  • EMS ログエントリ( c ):
fct_tpd_thread_2: scsitarget.hwpfct.errorReset:notice]: An error was encountered in the FC target driver on Fibre Channel target adapter 2c. The adapter will be automatically reset to clear the status:0x81800000, status1:0x52004a01, status2:0x218, DIP:0, RN:1, RDY:1, Dump owner:-1 condition
 
fct_tpd_thread_2: scsitarget.fcp.dump:debug]: FCP target SRAM dump generated for adapter 2c, FW FATAL ERR err_word1:1375750657 err_word2:536

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device

 

  • この記事は役に立ちましたか?