メインコンテンツまでスキップ

「network port show」および「ifstat -a」で、1Gbpsではなく、ポート速度が10Gbpsとして表示されます

Views:
7
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

環境

  • FAS2720
  • ONTAP 9.10.1P2
  • ONTAP 9.10.1P4

問題

  • ポートe0cnetwork port showifstat -a、e0d、e0eは、1Gbpsではなく、「および」に10Gbpsとして表示されます。

network port show

Node: node-1
Speed(Mbps) Health
Port IPspace Broadcast Domain Link MTU Admin/Oper Status
--------- ------------
---------------- ---- ---- ----------- --------
e0c Default - up 1500 auto/10000 healthy 
e0d Default - up 1500 auto/10000 healthy 
e0e Default fogrp 410 up 1500 auto/10000 healthy 

 

ifstat -a

-- interface  e0c  (1 day, 9 hours, 36 minutes, 15 seconds) --
LINK INFO
Speed:      10000M | Duplex:       full | Flowcontrol:     none
-- interface  e0d  (1 day, 9 hours, 36 minutes, 14 seconds) --
LINK INFO
 Speed:      10000M | Duplex:       full | Flowcontrol:     none
-- interface  e0e  (1 day, 9 hours, 36 minutes, 15
LINK INFO
 Speed:      10000M | Duplex:       full | Flowcontrol:     none

  • sysconfig -aおよびifconfig-vvvmは正常に動作します。

sysconfig -a

   slot 0: 1/10 Gigabit Ethernet Controller IX4-T
     e0e MAC Address:   d0:39:ea:1d:ab:d4 (auto-1000t-fd-up)
     e0f MAC Address:   d0:39:ea:1d:ab:d5 (auto-unknown-fd-down)
     e0c MAC Address:   d0:39:ea:1d:ab:d2 (auto-1000t-fd-up)
     e0d MAC Address:   d0:39:ea:1d:ab:d3 (auto-1000t-fd-up)

ifconfig-vvvm

e0c: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
   media: Ethernet autoselect (1000baseT <full-duplex>)
e0d: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
   media: Ethernet autoselect (1000baseT <full-duplex>)
e0e: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
   media: Ethernet autoselect (1000baseT <full-duplex>)

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device