メインコンテンツまでスキップ

「monitor.shutdown.brokenDisk:EMERGENCY" error」でノードをシャットダウンします

Views:
190
Visibility:
Public
Votes:
0
Category:
fas-systems<a>フィードバック</a><a>944990</a>
Specialty:
hw
Last Updated:

のしんだ

環境

  • ONTAP 9
  • FAS / AFFモデル

問題

monitor.shutdown.brokenDisk

このメッセージは、 自動シャットダウンシーケンスが   callhome.shutdown.pendingごとに期限切れになると表示され ます( RAIDグループが指定された時間間隔でデグレードモードになっていました。デフォルトは通常24時間です)。  

  • 次のエラーが発生し、テイクオーバーを実行せずにノードがシャットダウンします。

例:

[Node-01: statd: monitor.brokenDisk.notice:info]: When two disks are broken in raid_dp volume, the system shuts down automatically every 24 hours to encourage you to replace the disk. If you reboot the system it will run for another 24 hours before shutting down. (The 24 hour timeout may be increased by altering the "raid.timeout" value using the "options" command.)
[Node-01: statd: monitor.shutdown.brokenDisk:EMERGENCY]: data disk,parity disk in RAID group "/aggr0_n1/plex0/rg0" are broken. Halting system now.
[Node-01: shutdown_thread0: ha.localNodeShutDown:notice]: Shutdown of the local node has been initiated with inhibit_takeover set to TRUE.
[Node-01: shutdown_thread0: kern.shutdown:notice]: System shut down because : "BROKEN DISK".

  • 同じRAID-DPグループの2本のディスクで障害が発生し、「ダブルデグレード」状態になっている:

例:    

Aggregate aggr0_n1 (online, raid_dp, degraded) (block checksums)
  Plex /aggr0_n1/plex0 (online, normal, active, pool0)
   RAID group /aggr0_n1/plex0/rg0 (double degraded, block checksums)


RAID Disk      Device     HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)   Phys (MB/blks)
---------     ------     ------------- ---- ---- ---- ----- --------------   --------------
dparity       0d.03.0    0d   3   0   SA:A   0   SAS 10000 1142352/2339537408 1144641/2344225968 
parity        FAILED            N/A             1142352/ -
data         FAILED            N/A             1142352/ -

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.