メインコンテンツまでスキップ

ケーブルの不具合が原因でBrocadeスイッチポートがフラップする

Views:
1,293
Visibility:
Public
Votes:
2
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade
Last Updated:

環境

Brocadeスイッチ

問題

  • switchshowでスイッチポートがonlineになっています

/fabos/bin/switchshow :

Index Slot Port Address Media  Speed     State   Proto
============================================================
129   4   33   708100   id   N32    Online    FC  F-Port  10:00:00:10:9b:e7:9c:fc

  • portershowでは、複数の link failureloss sync エラーとエラー、 enc_out, crc err, crc g_eof, c3timeout Tx, pcs および uncorr エラーなどの他のメディアエラー が報告されます。

/fabos/cliexec/porterrshow :
      frames     enc    crc    crc    too    too    bad    enc   disc   link   loss   loss   frjt   fbsy    c3timeout    pcs    uncor
     tx     rx    in    err    g_eof   shrt   long   eof    out   c3    fail   sync   sig            tx    rx    err    err
100:   14.1k   5.8k   2.2k  964    932     0     0    32    3.9g  6    12    0     4.4k   0     0     0     0     0     0
/fabos/cliexec/porterrshow :
          frames        enc     crc     crc     too     too     bad     enc    disc    link    loss    loss    frjt    fbsy     c3timeout     pcs      uncor
        tx       rx      in     err     g_eof   shrt    long    eof     out    c3      fail    sync    sig                      tx      rx      err     err
129:   20.6k   20.7k    0       0       0       0       0       0       0       9       2.5k    0       7.2k    0       0       9       0       1.1k   26.0k

/fabos/cliexec/porterrshow:
      frames     enc    crc    crc    too    too    bad    enc   disc   link   loss   loss   frjt   fbsy    c3timeout    pcs    uncor
     tx     rx    in    err    g_eof   shrt   long   eof    out   c3    fail   sync   sig            tx    rx    err    err
  37:   2.3g   6.4g   0     0     0     0     0     0     0    53     2     0     4     0     0    53    0     0     0   

​​​​

  • sfpshow Rx & Tx 値が最適な範囲にあることをレポートします。

RX Power:   1.4    dBm (1365.3uW) 
TX Power:   -0.4   dBm (910.2 uW) 

  • sfpshow レポートのRx値が小さすぎます。

RX Power:    -15.1   dBm (30.7 uW)
TX Power:    -1.7    dBm (678.9 uW)

  • portshow 出力は、ポートがOnline&in _Sync状態であり、 LR_inがOLS_OUTより大きいことを確認します。これは、問題がスイッチポートの外部であることを示します。

portshow 37
portDisableReason: None
[..]
portState: 1    Online  
Protocol: FC
portPhys:  6    In_Sync   portScn:   32    F_Port   
FC Fastwrite: OFF
Interrupts:     48   Link_failure: 2   Frjt:      0
Unknown:       6   Loss_of_sync: 0   Fbsy:      0
Lli:         48   Loss_of_sig:  4   
Proc_rqrd:      159  Protocol_err: 0   
Timed_out:      0   Invalid_word: 0   
Tx_unavail:     0   Invalid_crc:  0
Delim_err:      0   Address_err:  0
Lr_in:        6  Ols_in:     2
Lr_out:       2   Ols_out:    3
Cong_Prim_in:     0

 

  • Fabriclogは、これら2つのポートがフラッピングしていることがわかります。

Fabriclog:
Switch 0; Tue Oct 11 12:34:12 2022 IST (GMT+5:30)
12:34:12.020011 SCN Port Offline;rsn=0x2,g=0x530            D2,P0  D2,P0  15    NA
12:34:12.020017 *Removing all nodes from port               D2,P0  D2,P0  15    NA

12:34:12.112102 SCN Port Offline;rsn=0x0,g=0x532            D2,P0  D2,P0  127   NA
12:34:12.112108 *Removing all nodes from port               D2,P0  D2,P0  127   NA
12:36:40.840204 SCN LR_PORT(0);g=0x530                      D2,P0  D2,P0  15    NA
12:36:40.860941 SCN Port Online; g=0x530,isolated=0         D2,P0  D2,P1  15    NA
12:36:40.861044 Port Elp engaged                            D2,P1  D2,P0  15    NA
12:36:40.861057 *Removing all nodes from port               D2,P0  D2,P0  15    NA

  • ルール defALL_32GSWL_SFPRXP_63 と defALL_OTHER_F_PORTSSTATE_CHG_5 トリガーは errdumploss signal、および link failuresframe timeout detected エラーとともにログの下で実行されます。

2022/10/11-12:41:00, [MAPS-1004], 46328, SLOT 1 | FID 128, INFO, XXX, SFP 3/15, Condition=ALL_32GSWL_SFP(RXP<=63), Current Value:[RXP, 0 uW], RuleName=defALL_32GSWL_SFPRXP_63, Dashboard Category=Port Health.
2022/10/11-12:41:00, [MAPS-1004], 46329, SLOT 1 | FID 128, INFO, XXX, SFP 12/15, Condition=ALL_32GSWL_SFP(RXP<=63), Current Value:[RXP, 0 uW], RuleName=defALL_32GSWL_SFPRXP_63, Dashboard Category=Port Health.
2022/10/11-12:43:00, [MAPS-1004], 46330, SLOT 1 | FID 128, INFO, XXX, SFP 3/15, Condition=ALL_32GSWL_SFP(RXP<=63), Current Value:[RXP, 0 uW], RuleName=defALL_32GSWL_SFPRXP_63, Dashboard Category=Port Health.
2022/10/11-12:43:00, [MAPS-1004], 46331, SLOT 1 | FID 128, INFO, XXX, SFP 12/15, Condition=ALL_32GSWL_SFP(RXP<=63), Current Value:[RXP, 0 uW], RuleName=defALL_32GSWL_SFPRXP_63, Dashboard Category=Port Health.

2023/02/20-16:42:20 (IST), [MAPS-1003], 9812, SLOT 2 | FID 128 | PORT 4/33, WARNING, switch, slot4 port33, F-Port 4/33, Condition=ALL_HOST_PORTS(STATE_CHG/min>5), Current Value:[STATE_CHG, 6], RuleName=defALL_HOST_PORTSSTATE_CHG_5, Dashboard Category=Port Health, Quiet Time=None.
2023/02/20-16:42:20 (IST), [MAPS-1003], 9813, SLOT 2 | FID 128 | PORT 4/33, WARNING, switch, slot4 port33, F-Port 4/33, Condition=ALL_OTHER_F_PORTS(STATE_CHG/min>5), Current Value:[STATE_CHG, 6], RuleName=defALL_OTHER_F_PORTSSTATE_CHG_5, Dashboard Category=Port Health, Quiet Time=None.

2022/06/26-03:53:42, [MAPS-1003], 42403, SLOT 2 | FID 128, WARNING, switch, slot6 port9, U-Port 6/9, Condition=ALL_PORTS(LOSS_SIGNAL/min>3), Current Value:[LOSS_SIGNAL, 386 LOS], RuleName=defALL_PORTSLOSS_SIGNAL_3, Dashboard Category=Port Health.
2022/06/26-03:54:42, [MAPS-1003], 42404, SLOT 2 | FID 128, WARNING, switch, slot6 port9, U-Port 6/9, Condition=ALL_PORTS(LOSS_SIGNAL/min>3), Current Value:[LOSS_SIGNAL, 378 LOS], RuleName=defALL_PORTSLOSS_SIGNAL_3, Dashboard Health.

2021/10/23-23:38:47, [MAPS-1003], 55690, SLOT 1 | FID 128, WARNING, Fabric1, slot10 port31, U-Port 10/31, Condition=ALL_PORTS(LF/min>3), Current Value:[LF, 4], RuleName=defALL_PORTSLF_3, Dashboard Category=Port Health.
2021/10/23-04:24:46, [PORT-1003], 53615, SLOT 1 | FID 128, WARNING, Fabric1, Port 223 Faulted because of many Link Failures.

2020/04/08-21:35:56, [C3-1014], 2556, CHASSIS, WARNING, Brocade6510,  Link Reset on Port S0,P8(12) vc_no=0 crd(s)lost=12 auto trigger.
2020/04/09-09:03:42, [C3-1014], 2557, CHASSIS, WARNING, Brocade6510,  Link Reset on Port S0,P8(12) vc_no=0 crd(s)lost=12 auto trigger.

2023/10/15-01:03:18, [AN-1014], 589, FID 128, INFO, SAN32G_FME1937T016_C2A1_F1, Frame timeout detected, tx port 37 rx port 15, sid 650900, did 632501, timestamp 2023-10-15 01:03:18 .
2023/10/15-01:03:18, [LOG-1000], 594, FID 128, INFO, SAN32G_FME1937T016_C2A1_F1, Previous message repeated 5 time(s).

 

  • RuleName=defALL_32GSWL_SFPRXP_63 Rx電力が低下し始め、アップストリームの問題I、 SFPまたはケーブルに障害があることを示している場合にトリガーされます。

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.