メインコンテンツまでスキップ

ゾーンのセットアップ後に Brocade ゾーニングが有効になっていないのはなぜですか?

Views:
38
Visibility:
Public
Votes:
0
Category:
flexpod-with-infrastructure-automation
Specialty:
brocade
Last Updated:

環境

  • Brocade ゾーニング
  • FlexPod

回答

ゾーンのセットアップ後に Brocade ゾーニングが有効になりません。

Brocade スイッチにゾーンを作成しましzoneshowcfgshowたが、ゾーニングがまたはに表示されません。

GUI または CLI を使用して Brocade でゾーンを作成する場合は、保存する前に設定を有効にする必要があります。

例:

brocade2400:admin> switchshow

 

switchName: brocade2400
switchType: 3.4
switchState: Online
switchRole: Principal
switchDomain: 1
switchId: XXX01
switchWwn: 10:00:00:XX:XX:XX:XX:XX
switchBeacon: OFF
port 0: id No_Light
port 1: -- No_Module
port 2: id No_Light
port 3: id No_Light
port 4: id No_Light
port 5: id No_Light
port 6: id No_Light
port 7: id No_Light

Brocade スイッチでゾーンを作成する基本的な手順は次のとおりです。

  1. エイリアスの作成(オプション、デバイス管理の読み取りと管理を容易にします)alicreate
  2. ゾーンを作成します。zonecreate
  3. ゾーン設定を作成します。cfgcreate
  4. 設定を有効にします。cfgenable
  5. 設定を保存します— cfgsave

例:

alicreate switch110:00:00:XX:XX:XX:XX:XX    (エイリアスを作成)
zonecreate ZNE_switch1switch1(ゾーンを作成)
cfgcreate PROD_fabaZNE_switch1  (ゾーン設定を作成)
cfgenable PROD_faba(ゾーン設定を有効にする)
cfgsave(設定を保存)

エイリアスを使用すると、大規模なファブリックを簡単に管理できます。これは、ユーザが判読できる形式を使用できるためです。ゾーン設定を使用すると、 1 つ以上のゾーンを作成してグループ化し、 1 つの設定として管理できます。有効な構成は、有効な構成です。1 つのスイッチには多くの設定が存在できますが、一度にアクティブにできるのは 1 つだけです。リブート後も設定を保持するには、設定を保存する必要があります。

追加情報

ここにテキストを追加します。

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.