メインコンテンツまでスキップ

Cisco Nexus スイッチで IO FPGA をアップグレードできません

Views:
194
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
hw
Last Updated:

環境

  • Cisco Nexus 3132Q - V
  • Cisco Nexus 3232C
  • Cisco Nexus 92300YC
  • Cisco Nexus 9336C-FX2

問題

「環境」セクションの スイッチモデルで EPLD イメージを更新している間に、デバイスがアップグレードをプログラミングしているときに IO FPGA EPLD デバイスがと表示されますが、リブート後に、デバイスには更新されたバージョンは表示されません。


switch1# install epld bootflash:n9000-epld.9.3.4.img module 1
Compatibility check:
Module Type Upgradable Impact Reason
------ ----------------- ---------- ---------- ------
 1 SUP Yes disruptive Module Upgradable
Retrieving EPLD versions.... Please wait.
Images will be upgraded according to following table:

Module  Type   EPLD             Running-Version   New-Version  Upg-Required
------  ----  -------------     ---------------   -----------  ------------
     1   SUP  MI FPGA                   0x9        0x12            Yes
     1   SUP  IO FPGA                   0x9        0x12            Yes


The above modules require upgrade.
The switch will be reloaded at the end of the upgrade
Do you want to continue (y/n) ? [n] y
Proceeding to upgrade Modules.
Starting Module 1 EPLD Upgrade

Module 1 : MI FPGA [Programming] : 100.00% (     64 of      64 sectors)
Module 1 : IO FPGA [Programming] : 100.00% (     64 of      64 sectors)
Module 1 EPLD upgrade is successful.
Module Type Upgrade-Result
------ ------------------ --------------
 1 SUP Success
Module 1 EPLD upgrade is successful.

リブート後の出力:

switch1# show version module 1 epld
EPLD Device Version
---------------------------------------
MI FPGA 0x12
IO FPGA 0x9

 

Scan to view the article on your device
CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support