シングルノードレポートsplog.sp.not.accessible

最後の更新
PDFとして保存

Views:: 8

Visibility:: Public

Votes:: 0

Category:: aff-series<a>BMC</a><a>API</a><a>Service Processor （ SP ）</a><a>servprocd</a>

Specialty:: hw

Last Updated:

環境

Baseboard Management Controller（BMC）
サービスプロセッサ（SP）
BMC / SP APIサービス
servprocdデーモン

問題

1つのノードが、クラスタ内の他のノードのSP / BMCにservprocd接続の問題を報告しています。例：

[node_name_03: servprocd: splog.sp.not.accessible:error]: The SP on the remote node (node_name_01) is not accessible because of The Service Processor on node "node_name_01" is not reachable. Verify that the SP or BMC is online, verify that api-service is enabled on the SP or BMC, verify that the partner node is running, check if pings from SP or BMC to partner node work, check if hw-assist keep-alives are normal, check that network ports are configured correctly and are functional (up). Then, try the command again..

[node_name_03: servprocd: splog.sp.not.accessible:error]: The SP on the remote node (node_name_02) is not accessible because of The Service Processor on node "node_name_02" is not reachable. Verify that the SP or BMC is online, verify that api-service is enabled on the SP or BMC, verify that the partner node is running, check if pings from SP or BMC to partner node work, check if hw-assist keep-alives are normal, check that network ports are configured correctly and are functional (up). Then, try the command again..

これらのメッセージは、ONTAPまたはSP / BMCファームウェアの更新後に表示されることがあります。
ノードでservprocdデーモンとapi-serviceが再起動されました
HW-Assist a ping tests ok、between node magnamente LIFとBMC IP