システムヘルスアラートが「 Service Processor is not properly configured 」と報告する

に適用されます

• clustered Data ONTAP
• FAS/AFFモデル

問題

• "system health alert show" reports about improper configuration like the following:

Cluster::> system health alert show
        Node: Cluster-01
      Resource: SP Config
      Severity: Major
   Indication Time: Fri Apr 17 09:17:32 2020
      Suppress: false
     Acknowledge: false
   Probable Cause: Service Processor is not properly configured.
   Possible Effect: You might not be able to use the Service Processor to
           remotely access, monitor, and troubleshoot your
           storage system.
 Corrective Actions: 1. Use the "system service-processor network modify" command to configure the network interface of the Service Processor.
           2. Use the "system service-processor image modify -node Cluster-01 -autoupdate true" to configure AutoUpdate feature of the Service Processor.
           3. Contact the technical support if the alert persists.

• 「 System Health Subsystem show 」は、サービスプロセッササブシステムのデグレードステータスを示します

Cluster::> system health subsystem show
Subsystem      Health
----------------- ------------------
SAS-connect     ok
Environment     ok
Memory       ok
Service-Processor degraded
Switch-Health    ok
CIFS-NDO      ok
Motherboard     ok
IO         ok
MetroCluster    ok
MetroCluster_Node ok
FHM-Switch     ok
FHM-Bridge     ok
SAS-connect_Cluster ok
13 entries were displayed.

• 「 system controller show 」は、ノードがデグレード状態であることを示しています

Cluster::> system controller show
Controller Name       System ID    Serial Number    Model   Status
------------------------- ------------- ----------------- -------- -----------
Cluster-01           537xxxxxx    621xxxxxxxxx    FAS2650  degraded
Cluster-02           537xxxxxx    621xxxxxxxxx    FAS2650  ok